Cray System Management
v
1.6
1.5
1.4
1.3
1.2
1.0
0.9
1.4 Management network cabling checklist
Application Node Config
Cabinets
Cabling
CEPH CSI Verification
Collecting NCN MAC Addresses
Collecting the BMC MAC Addresses
Compute Node BIOS workaround for WNC-rome aka HPE CRAY EX425
CRAY Guide Contribution
Cray Site Init Files
Cray System Management (CSM) - Release Notes
CSM Documentation Guide
CSM Install
CSM Install Reboot - Final NCN Install
CSM Install Validation and Health Checks
CSM Metal Install
CSM Platform Install
CSM Troubleshooting Information
known issues
CFS Sessions are Stuck in Pending State
Copying file from the cray-conman pod fails
Orphaned CFS Pods After Booting or Rebooting
CSM USB LiveCD - Creation and Configuration
Disk Cleanslate
FIRMWARE ACTION SERVICE (FAS) | User Procedures
Firmware Action Service (FAS) Administration Guide
Firmware Checkout
Firmware Update the system with FAS
Gigabyte Firmware Bug
Guide Netboot an NCN from a Spine
HARVEST 13 CONFIG
HMN Connections File
IP-Helper configuration
LiveCD - Metal Basecamp
LiveCD 1.3 Rollback
LiveCD Re-Installs
LiveCD Recovery
LiveCD Remote ISO Install
LiveCD Virtual ISO Boot
Management Network Access Port configurations.
Management Network ACL configuration
Management Network Base Configuration
Management Network CAN setup
Management Network Dell And Mellanox Upgrades
Management Network Example Config
Management Network Firmware Update
Management Network Flow Control Settings
Management Network Layer3 Configuration
Management Network MLAG Configuration
Management Network NTP configuration
Management Network SNMP configuration
Management Network Spanning-Tree Configuration.
Management Network Switch Rename
Management Network Uplink configuration
Management Network VLAN Configuration
Manually add UAN Aliases to SLS
Move Site Connections
NCN BIOS Preferences
NCN Booting
NCN Development
NCN Hardware Swaps
NCN Image Customization
NCN Metadata over USB-Serial Cable
NCN Operating System Release
NCN Packages
NCN Partitions
NCN/Management Node Locking
Network Firmware
Network Stack (Software and Hardware)
Networking
Node Firmware
Non-Compute Node Images
NTP On NCNs
operations
boot orchestration
Stage Changes Without BOS
Upload Node Boot Information to Boot Script Service (BSS)
FAS Loader
TROUBLESHOOTING FAS LOADER FAILS
hmcollector
Adjust HM Collector resource limits and requests
kubernetes
Kubernetes and Bare Metal EtcD Certificate Renewal
network
metallb bgp
Check BGP Status and Reset Sessions
configuration management
Configuration Layers
CSM product management
Security Hardening
Change Passwords and Credentials
node management
Adding a Liquid-cooled blade to a System
Check and Set the metal.no-wipe Setting on NCNs
Enable Kdump
Reboot NCNs
Removing a Liquid-cooled blade from a System
system management health
Troubleshoot Prometheus Alerts
security and authentication
Add LDAP User Federation
Change Air-Cooled Node BMC Credentials
Change Credentials on ServerTech PDUs
Change Cray EX Cabinet Global Default Password
Change NCN Image Root Password and SSH Keys
Change NCN Image Root Password and SSH Keys on PIT Node
Change SMNP Credentials on Leaf Switches
Change the Keycloak Admin Password
Provisioning a Liquid-Cooled EX Cabinet CEC with Default Credentials
Restrict Network Access to the ncn-images S3 Bucket
Update Default Air-Cooled BMC and Leaf Switch SNMP Credentials
Update Default ServerTech PDU Credentials used by the Redfish Translation Service (RTS)
Update NCN Passwords
Updating the Liquid-Cooled EX Cabinet Default Credentials after a CEC Password Change
Overview
Overview
PXE boot Troubleshooting
Safeguards
Service Guides
Setup Site-Init From SHASTA-CFG
Switch Metadata
The Shasta User Access Service
upgrade
CSM 0.9 Patch Release Upgrade Procedures
CSM 0.9.6 Patch Installation Instructions
CSM 0.9.4 Patch Upgrade Guide
CVE-2021-22555 CVE-2021-33909
operations
network
metallb bgp
Check BGP Status and Reset Sessions
node management
Check and Set the metal.no-wipe Setting on NCNs
Reboot NCNs
CSM 0.9.2 Patch Upgrade Guide
CSM 0.9.3 Patch Upgrade Guide
Upgrade CSM Install Workarounds RPM
Utility Storage Installation Troubleshooting
Verify and Update BGP neighbors
CRAY System Management - Guides and References
>
operations
> node management
node management
Topics:
Adding a Liquid-cooled blade to a System
Check and Set the metal.no-wipe Setting on NCNs
Enable Kdump
Reboot NCNs
Removing a Liquid-cooled blade from a System