Troubleshoot Ansible Play Failures in CFS Sessions

View the Kubernetes logs for a Configuration Framework Service (CFS) pod in an error state to determine whether the error resulted from the CFS infrastructure or from an Ansible play that was run by a specific configuration layer in a CFS session.

Use this procedure to obtain important triage information for Ansible plays being called by CFS.

Prerequisites

  • A failed configuration session exists in CFS.

Procedure

  1. Find the CFS pod that is in an error state.

    1. List all CFS pods in error state.

      ncn-mw# kubectl get pods -n services | grep -E "^cfs-.*[[:space:]]Error[[:space:]]"
      

      Example output:

      cfs-e8e48c2a-448f-4e6b-86fa-dae534b1702e-pnxmn   0/3     Error    0          25h
      
    2. Set CFS_POD_NAME to the name of the pod to be investigated.

      Use the pod name identified in the previous substep.

      ncn-mw# CFS_POD_NAME=cfs-e8e48c2a-448f-4e6b-86fa-dae534b1702e-pnxmn
      
  2. Check to see what containers are in the pod.

    ncn-mw# kubectl logs -n services "${CFS_POD_NAME}"
    

    Example output:

    Error from server (BadRequest): a container name must be specified for pod cfs-e8e48c2a-448f-4e6b-86fa-dae534b1702e-pnxmn, choose one of: [inventory ansible-0 istio-proxy] or one of the init containers: [git-clone-0 istio-init]
    

    Issues rarely occur in the istio-init and istio-proxy containers. These containers can be ignored for now.

  3. Check the git-clone-0, inventory, and ansible-0 containers, in that order.

    If there are additional Ansible pods, examine those as well, in ascending order.

    1. Check the git-clone-0 container.

      ncn-mw# kubectl logs -n services "${CFS_POD_NAME}" git-clone-0
      
    2. Check the inventory container.

      ncn-mw# kubectl logs -n services "${CFS_POD_NAME}" inventory
      

      Example output:

        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (7) Failed to connect to localhost port 15000: Connection refused
      Waiting for Sidecar
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      HTTP/1.1 200 OK
      content-type: text/html; charset=UTF-8
      cache-control: no-cache, max-age=0
      x-content-type-options: nosniff
      date: Thu, 05 Dec 2019 15:00:11 GMT
      server: envoy
      transfer-encoding: chunked
      
      Sidecar available
      2019-12-05 15:00:12,160 - INFO    - cray.cfs.inventory - Starting CFS Inventory version=0.4.3, namespace=services
      2019-12-05 15:00:12,171 - INFO    - cray.cfs.inventory - Inventory target=dynamic for cfsession=boa-2878e4c0-39c2-4df0-989e-053bb1edee0c
      2019-12-05 15:00:12,227 - INFO    - cray.cfs.inventory.dynamic - Dynamic inventory found a total of 2 groups
      2019-12-05 15:00:12,227 - INFO    - cray.cfs.inventory - Writing out the inventory to /inventory/hosts
      
    3. Check the ansible-0 container.

      Look towards the end of the Ansible log in the PLAY RECAP section to see if any targets failed. If a target failed, then look above in the log at the immediately preceding play. In the example below, the ncmp_hsn_cns role has an issue when being run against the compute nodes.

      ncn-mw# kubectl logs -n services "${CFS_POD_NAME}" ansible-0
      

      Example output:

      Waiting for Inventory
      Waiting for Inventory
      Inventory available
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      
      ...
      
      TASK [ncmp_hsn_cns : SLES Compute Nodes (HSN): Create/Update ifcfg-hsnx File(s)] ***
      fatal: [x3000c0s19b1n0]: FAILED! => {"msg": "'interfaces' is undefined"}
      fatal: [x3000c0s19b2n0]: FAILED! => {"msg": "'interfaces' is undefined"}
      fatal: [x3000c0s19b3n0]: FAILED! => {"msg": "'interfaces' is undefined"}
      fatal: [x3000c0s19b4n0]: FAILED! => {"msg": "'interfaces' is undefined"}
      
      NO MORE HOSTS LEFT *************************************************************
      
      PLAY RECAP *********************************************************************
      x3000c0s19b1n0             : ok=28   changed=20   unreachable=0    failed=1    skipped=77   rescued=0    ignored=1
      x3000c0s19b2n0             : ok=27   changed=19   unreachable=0    failed=1    skipped=63   rescued=0    ignored=1
      x3000c0s19b3n0             : ok=27   changed=19   unreachable=0    failed=1    skipped=63   rescued=0    ignored=1
      x3000c0s19b4n0             : ok=27   changed=19   unreachable=0    failed=1    skipped=63   rescued=0    ignored=1
      

Run the Ansible play again once the underlying issue has been resolved.