Change the Keycloak Admin Password

Update the default password for the admin Keycloak account using the Keycloak user interface (UI). After updating the password in Keycloak, encrypt it on the system and verify that the change was made successfully.

System domain name

The SYSTEM_DOMAIN_NAME value found in some of the URLs on this page is expected to be the system’s fully qualified domain name (FQDN).

The FQDN can be found by running the following command on any Kubernetes NCN.

ncn-mw# kubectl get secret site-init -n loftsman -o jsonpath='{.data.customizations\.yaml}' | base64 -d | yq r - spec.network.dns.external

Example output:

system..hpc.amslabs.hpecorp.net

Be sure to modify the example URLs on this page by replacing SYSTEM_DOMAIN_NAME with the actual value found using the above command.

Procedure

  1. Log in to Keycloak with the default admin credentials.

    Point a browser at https://auth.SYSTEM_DOMAIN_NAME/keycloak/admin, replacing SYSTEM_DOMAIN_NAME with the actual NCN’s DNS name.

    The following is an example URL for a system: https://auth.system1.us.cray.com/keycloak/admin

    Use the following admin login credentials:

    • Username: admin
    • The password can be obtained with the following command:
    ncn-mw# kubectl get secret -n services keycloak-master-admin-auth \
             --template={{.data.password}} | base64 --decode

  2. Click the Admin drop-down menu in the upper-right corner of the page.

  3. Select Manage Account.

  4. Click the Password tab on the left side of the page.

  5. Enter the existing password, new password and confirmation, and then click Save.

  6. Follow the Redeploying a Chart procedure with the following specifications:

    • Name of chart to be redeployed: cray-keycloak

    • Base name of manifest: platform

    • When reaching the step to update customizations, perform the following steps:

      Only follow these steps as part of the previously linked chart redeploy procedure.

      1. Clone the CSM repository.
      ncn-w001# git clone https://github.com/Cray-HPE/csm.git

      ```bash
```

      1. Change the password in the customizations.yaml file.

        In the customizations.yaml file, set the values for the keycloak_master_admin_auth keys in the spec.kubernetes.sealed_secrets field. The value in the data element where the name is password needs to be changed to the new Keycloak master admin password. The section below will replace the existing sealed secret data in the customizations.yaml file.

      2. Encrypt the values after changing the customizations.yaml file.

        ncn-w001# ./utils/secrets-seed-customizations.sh customizations.yaml

        If the above command complains that it cannot find certs/sealed_secrets.crt then you can run the following commands to create it:

        mkdir -pV certs && ./utils/bin/linux/kubeseal --controller-name sealed-secrets --fetch-cert > certs/sealed_secrets.crt

    • When reaching the step to validate that the redeploy was successful, perform the following step:

      Only follow this step as part of the previously linked chart redeploy procedure.

      Verify that the Secret has been updated.

      Give the SealedSecret controller a few seconds to update the Secret, then run the following command to see the current value of the Secret:

      kubectl get secret -n services keycloak-master-admin-auth --template={{.data.password}} | base64 --decode

    • Make sure to perform the entire linked procedure, including the step to save the updated customizations.