Cray System Management Documentation > Cray System Management (CSM) Administration Guide > UAS user and admin topics > Register a UAI Image

Register a UAI Image

Register a UAI image with UAS. Registration tells UAS where to locate the image and whether to use the image as the default for UAIs.

Prerequisites

Initialize cray administrative CLI.
Create a UAI image and upload it to the container registry. See Customize End-User UAI Images.

Procedure

Register a UAI image with UAS.

The following is the minimum required CLI command form:
```
ncn-m001-pit# cray uas admin config images create --imagename <image_name>
```
To register the image registry.local/cray/custom-end-user-uai:latest, the stock end-user UAI image, use:
```
ncn-m001-pit# cray uas admin config images create --imagename registry.local/cray/custom-end-user-uai:latest
```
The following example registers the stock UAI image registry.local/cray/custom-end-user-uai:latest. This example also implicitly sets the default attribute to false because the --default option is omitted in the command.
```
ncn-m001-pit# cray uas admin config images create --imagename registry.local/cray/custom-end-user-uai:latest --default yes
```
To register the image explicitly as non-default:
```
ncn-m001-pit# cray uas admin config images create --imagename registry.local/cray/custom-end-user-uai:latest --default no
```
Registering an image with the --default no option is usually unnecessary. Omitting the --default option causes UAS to set the default attribute as false internally.