VLAN interface

The switch also supports classic L3 VLAN interfaces.

Relevant Configuration

Configure the VLAN

switch (config) # vlan 6
switch (config vlan 6) #

Create and enable the VLAN interface, and assign it an IP address

switch(config vlan 6)# ip address 10.1.0.2/16

Show Commands to Validate Functionality

show vlan

Expected Results

  • Step 1: You can configure the VLAN
  • Step 2: You can enable the interface and associate it with the VLAN
  • Step 3: You can create an IP-enabled VLAN interface, and it is up
  • Step 4: You validate the configuration is correct
  • Step 5: You can ping from the switch to the client and from the client to the switch

Back to Index