Configure Prometheus Alerta Alert Notifications

Configure an Alerta alert notification for Prometheus Alertmanager alerts.

System domain name

The SYSTEM_DOMAIN_NAME value found in some of the URLs on this page is expected to be the system’s fully qualified domain name (FQDN).

(ncn-mw#) The FQDN can be found by running the following command on any Kubernetes NCN.

kubectl get secret site-init -n loftsman -o jsonpath='{.data.customizations\.yaml}' | base64 -d | yq r - spec.network.dns.external

Example output:

system.hpc.amslabs.hpecorp.net

Be sure to modify the example URLs on this page by replacing SYSTEM_DOMAIN_NAME with the actual value found using the above command.

Procedure

This procedure can be performed on any master or worker NCN.

  1. (ncn-mw#) Save the current alert notification configuration, in case a rollback is needed.

    kubectl get secret -n sysmgmt-health alertmanager-cray-sysmgmt-health-promet-alertmanager \
        -ojsonpath='{.data.alertmanager\.yaml}' | base64 --decode > /tmp/alertmanager-default.yaml

  2. (ncn-mw#) Create a secret and an alert configuration that will be used to add Alerta notifications for the alerts.

    1. Create the secret file.

      Create a file named /tmp/alertmanager-secret.yaml with the following contents:

      apiVersion: v1
data:
  alertmanager.yaml: ALERTMANAGER_CONFIG
kind: Secret
metadata:
  labels:
    app: prometheus-operator-alertmanager
    chart: prometheus-operator-9.3.1
    heritage: Tiller
    release: cray-sysmgmt-health
  name: alertmanager-cray-sysmgmt-health-promet-alertmanager
  namespace: sysmgmt-health
type: Opaque

    2. Create the Alerta alert configuration file.

      In the following example file, the Alerta server is used to send the notification to http://sma-alerta.sma.svc.cluster.local:8080/webhooks/prometheus. Update the fields under webhook_configs: to reflect the desired configuration.

      Create a file named /tmp/alertmanager-new.yaml with the following contents:

      global:
  resolve_timeout: 5m
route:
  group_by: ['alertname']
  group_wait: 30s
  group_interval: 5m
  repeat_interval: 1h
  receiver: 'web.hook'
receivers:
- name: 'web.hook'
  webhook_configs:
  - url: 'http://sma-alerta.sma.svc.cluster.local:8080/webhooks/prometheus'
inhibit_rules:
  - source_match:
      severity: 'critical'
    target_match:
      severity: 'warning'
    equal: ['alertname', 'dev', 'instance']

  3. (ncn-mw#) Replace the alert notification configuration based on the files created in the previous steps.

    sed "s/ALERTMANAGER_CONFIG/$(cat /tmp/alertmanager-new.yaml \
            | base64 -w0)/g" /tmp/alertmanager-secret.yaml \
            | kubectl replace --force -f -

  4. (ncn-mw#) Validate the configuration changes.

    1. View the current configuration.

      kubectl exec alertmanager-cray-sysmgmt-health-promet-alertmanager-0 \
        -n sysmgmt-health -c alertmanager -- cat /etc/alertmanager/config/alertmanager.yaml

    2. If the configuration does not look accurate, check the logs for errors.

      kubectl logs -f -n sysmgmt-health pod/alertmanager-cray-sysmgmt-health-promet-alertmanager-0 alertmanager

An Alerta notification will be sent once either of the alerts set in this procedure is FIRING in Prometheus. See https://prometheus.cmn.SYSTEM_DOMAIN_NAME/alerts for more information.