Cray System Management Documentation > Cray System Management (CSM) Administration Guide > utility storage > Troubleshoot System Clock Skew

Troubleshoot System Clock Skew

Resynchronize system clocks after Ceph reports a clock skew.

Systems use chronyd to synchronize their system clocks. If systems are not able to communicate, then the clocks can drift, causing clock skew. Clock skew can also be caused by an individual or an automated task manually changing the clocks. In this case, chronyd may require a series of steps (time adjustments) to resynchronize the clocks.

Major time jumps where the clock is set back in time will require a full restart of all Ceph services.

Clock skew can cause issues with Kubernetes operations, etcd, node responsiveness, and more.

Prerequisites

This procedure requires admin privileges.

Procedure

Verify that the system is impacted by clock skew.

Ceph provides block storage and requires a clock skew of less than 0.05 seconds to report back healthy.

ceph -s

Example output:

cluster:
   id:     b6d509e6-772e-4785-a421-e4a138b1780c
   health: HEALTH_WARN
           clock skew detected on mon.ncn-m002, mon.ncn-m003

services:
   mon: 3 daemons, quorum ncn-s001,ncn-s002,ncn-s003 (age 20h)
   mgr: ncn-s003(active, since 9d), standbys: ncn-s001, ncn-s002
   mds: cephfs:1 {0=ncn-s002=up:active} 2 up:standby
   osd: 18 osds: 18 up (since 20h), 18 in (since 9d)
   rgw: 3 daemons active (ncn-s001.rgw0, ncn-s002.rgw0, ncn-s003.rgw0)

data:
   pools:   10 pools, 224 pgs
   objects: 19.41k objects, 59 GiB
   usage:   167 GiB used, 274 GiB / 441 GiB avail
   pgs:     224 active+clean

io:
   client:   919 KiB/s wr, 0 op/s rd, 16 op/s wr

IMPORTANT: If you see this message in the Ceph logs unable to obtain rotating service keys; retrying, it also indicates clock skew. You may have to run xzgrep skew *.xz to see the skew if your logs have rolled over.

View the Ceph health details.
1. View the Ceph logs.
  
  If looking back to earlier logs, use the xzgrep command for the ceph.log or the ceph-mon*.log. There are cases where the MGR and OSD logs are not in the ceph-mon logs. This indicates that the skew was very drastic and sudden, causing the ceph-mon process to panic and not log the issue.
```
grep skew /var/log/ceph/*.log
```
2. View the system time.
```
/etc/ansible/boto3_ansible/bin/ansible ceph_all -m shell -a date
```
Sync the clocks to fix the issue.
```
systemctl restart chronyd.service
```
Wait a bit after running the command and the Ceph alert will clear. Restart the Ceph mon service on that node if the alert does not clear.

Check Ceph health to verify the clock skew issue is resolved.

It may take up to 15 minutes for this warning to resolve.

ceph -s

Example output:

cluster:
  id:     5f3b4031-d6c0-4118-94c0-bffd90b534eb
  health: HEALTH_OK

services:
  mon: 3 daemons, quorum ncn-s001,ncn-s002,ncn-s003 (age 20h)
  mgr: ncn-s003(active, since 9d), standbys: ncn-s001, ncn-s002
  mds: cephfs:1 {0=ncn-s002=up:active} 2 up:standby
  osd: 18 osds: 18 up (since 20h), 18 in (since 9d)
  rgw: 3 daemons active (ncn-s001.rgw0, ncn-s002.rgw0, ncn-s003.rgw0)

data:
  pools:   11 pools, 240 pgs
  objects: 3.12k objects, 11 GiB
  usage:   45 GiB used, 39 GiB / 84 GiB avail
  pgs:     240 active+clean

If clocks are in sync and Ceph is still reporting skew, refer to Manage Ceph Services on restarting services.