The Configuration Framework Service (CFS) contains a database of the configuration state of available hardware known to the Hardware State Manager (HSM).
When new nodes are added to the HSM database, the CFS-Hardware-Sync-Agent enters the component into the CFS database with an empty state of configuration.
Administrators are able to set a desired CFS configuration for each component, and the CFS-Batcher ensures the desired configuration state and the current configuration state match.
See Automatic Configuration Management for more information.
The following fields are tracked for each component to determine the status and state of the component:
configuration_status
The status of the component’s configuration. Valid status values are:
unconfigured - The component has no recorded state and no desired configuration or no valid desired configuration.failed - One of the configuration layers for the component has failed and the retry limit has been exceeded.pending - The component’s desired state and actual state do not match. The component will be configured automatically if enabled.configured - The component’s desired state and actual state match.desired_config
The CFS configuration assigned to this component.
enabled
Indicates whether the component will be automatically configured by CFS or not.
error_count
The number of times configuration sessions have failed to configure this component.
retry_policy
The number of times the configuration will be attempted if it fails. If error_count >= retry_policy, CFS will not continue attempts to apply the desired_config.
state
The list of configuration layers that have been applied to the component. This information is not returned by default but can be requested by adding --state-details true to any components query.
For each layer in the component state the status can be one of the following:
applied - The playbook completed successfully.failed - The playbook encountered an error while configuring this component.incomplete - The playbook exited due to an error on another component and will be re-run against this component.skipped - The playbook completed, but this component was not a valid target.desired_state
The list of configuration layers that should be applied to the component based on the desired_config, and the status of each of these layers.
This information is not returned by default but can be requested by adding --config-details true to any components query.
logs
A link to the ARA UI for all Ansible logs related to this component.
(ncn-mw#) To view the configuration state of a given component, use the describe command for a given component name (xname):
cray cfs v3 components describe <xname> --format json
Example output:
{
"configuration_status": "configured",
"desired_config": "example-config",
"enabled": true,
"error_count": 0,
"id": "x3000c0s11b0n0",
"logs": "ara.cmn.example.site/hosts?name=x3000c0s11b0n0",
"tags": {}
}
(ncn-mw#) To view the configuration state details of a given component, use the describe command for a given component name (xname) with --state-details true:
cray cfs v3 components describe <xname> --state-details true --format json
Example output:
{
"configuration_status": "configured",
"desired_config": "example-config",
"enabled": true,
"error_count": 0,
"id": "x3000c0s11b0n0",
"logs": "ara.cmn.example.site/hosts?name=x3000c0s11b0n0",
"state": [
{
"clone_url": "https://api-gw-service-nmn.local/vcs/cray/example.git",
"commit": "e230aae4ecd4cc0aa3c5fe5835f2c896e15fd8ab",
"last_updated": "2023-07-18T14:54:57Z",
"playbook": "site.yml",
"session_name": "batcher-f3c378fa-186e-4b41-a56e-ffbffb540554",
"status": "applied"
}
],
"tags": {}
}
(ncn-mw#) To disable CFS configuration of a component, use the --desired-config option with the name of a CFS configuration:
IMPORTANT: Ensure that the new configuration has been created with the
cray cfs v3 configurations update <config_name>command before assigning the configuration to any components.
cray cfs v3 components update <xname> --desired-config <config_name>
(ncn-mw#) To disable CFS configuration of a component, use the --enabled option:
WARNING: When a node reboots and the state-reporter reports in to CFS, it will automatically enable configuration. The following command only disables configuration until a node reboots.
cray cfs v3 components update <xname> --enabled false
Use --enabled true to re-enable the component.
(ncn-mw#) To force a component which has a specific desired_config to a different configuration, use the update subcommand to change the configuration:
cray cfs v3 components update <xname> --desired-config new-config --enabled true
IMPORTANT: Ensure that the new configuration has been created with the
cray cfs v3 configurations update <config_name>command before assigning the configuration to any components.
(ncn-mw#) To force a component to retry its configuration again after it failed, change the error_count to less than the retry_policy, or raise the retry_policy.
If the error_count has not reached the retry limit, CFS will automatically keep attempting the configuration and no action is required.
cray cfs v3 components update <xname> --error-count 0 --enabled true
(ncn-mw#) To force a component to reapply the same configuration after it succeeded, clear the recorded state for the component.
cray cfs v3 components update <xname> --state [] --enabled true
Updating multiple components at once is not currently available in the CLI due to limitations with the CLI.
However for those programmatically interacting with the CFS API, it is possible to update multiple components at once by calling /v3/components with a PATCH operation.
It is possible to either provide patches for multiple components in a list, or to provide a single patch and filters for which components to apply the patch to. See the CFS API specification for more information.