The intent here is to show case very basic MLAG link configuration and your configuration may differ. This is what defines the LAG to be able to peer both to Spine-01 and Spine-02.
interface mlag-port-channel 1 interface mlag-port-channel 1 mtu 9216 force interface ethernet 1/1 mlag-channel-group 1 mode active interface mlag-port-channel 1 switchport mode hybrid interface mlag-port-channel 1 interface mlag-port-channel 1-11 lacp-individual enable force interface mlag-port-channel 1 switchport hybrid allowed-vlan add 2 interface mlag-port-channel 1 switchport hybrid allowed-vlan add 4 interface mlag-port-channel 1 switchport hybrid allowed-vlan add 7 interface mlag-port-channel 1 switchport hybrid allowed-vlan add 10 |
interface mlag-port-channel 1 interface mlag-port-channel 1 mtu 9216 force interface ethernet 1/1 mlag-channel-group 1 mode active interface mlag-port-channel 1 switchport mode hybrid interface mlag-port-channel 1 interface mlag-port-channel 1-11 lacp-individual enable force interface mlag-port-channel 1 switchport hybrid allowed-vlan add 2 interface mlag-port-channel 1 switchport hybrid allowed-vlan add 4 interface mlag-port-channel 1 switchport hybrid allowed-vlan add 7 interface mlag-port-channel 1 switchport hybrid allowed-vlan add 10 |