This procedure allocates IP addresses for an NCN being added to a system. The addresses are allocated on the applicable networks (HMN, NMN, MTL, CMN, etc.), and added to both the System Layout Service (SLS) and the Boot Script Service (BSS).
This procedure will perform and verify the following:
bootstrap_dhcp subnet for the various networks in system.(ncn-mw#) Retrieve an API token.
export TOKEN=$(curl -s -S -d grant_type=client_credentials \
-d client_id=admin-client -d client_secret=`kubectl get secrets admin-client-auth \
-o jsonpath='{.data.client-secret}' | base64 -d` \
https://api-gw-service-nmn.local/keycloak/realms/shasta/protocol/openid-connect/token \
| jq -r '.access_token')
(ncn-mw#) Determine the component name (xname) of the NCN by referring to the HMN of the systems SHCD, if it has not been determined yet.
Sample row from the HMN tab of an SHCD:
| Source (J20) | Source Rack (K20) | Source Location (L20) | (M20) | Parent (N20) | (O20) | Source Port (P20) | Destination (Q20) | Destination Rack (R20) | Destination Location (S20) | (T20) | Destination Port (U20) |
|---|---|---|---|---|---|---|---|---|---|---|---|
wn01 |
x3000 |
u04 |
- |
j3 |
sw-smn01 |
x3000 |
u14 |
- |
j48 |
The Source name for the a worker NCN would be in the format of
wn01; master NCNs aremn01, and storage NCNs aresn01.
Node xname format: xXcCsSbBnN
| SHCD Column to Reference | Description | ||
|---|---|---|---|
| X | Cabinet number | Source Rack (K20) | The Cabinet or rack number containing the Management NCN. |
| C | Chassis number | For air-cooled nodes within a standard rack, the chassis is 0. If the air-cooled node node is within an air-cooled chassis |
|
| S | Slot/Rack U | Source Location (L20) | The Slot of the node is determined by the bottom most rack U that node occupies. |
| B | BMC number | For Management NCNs the BMC number is 0. | |
| N | Node number | For Management NCNs the Node number is 0. |
export XNAME=x3000c0s4b0n0
(ncn-mw#) Perform a dry-run of allocating IP addresses for the NCN.
cd /usr/share/doc/csm/scripts/operations/node_management/Add_Remove_Replace_NCNs/
./add_management_ncn.py allocate-ips --xname "$XNAME" --alias "$NODE"
Example output:
...
IP Addressees have been allocated for x3000c0s36b0n0 (ncn-s004) and been added to SLS and BSS
WARNING A Dryrun was performed, and no changes were performed to the system
=================================
Management NCN IP Allocation
=================================
Network | IP Address
--------|-----------
CMN | 10.103.11.42
CAN | 10.102.4.10
HMN | 10.254.1.14
MTL | 10.1.1.7
NMN | 10.252.1.9
=================================
Management NCN BMC IP Allocation
=================================
Network | IP Address
--------|-----------
HMN | 10.254.1.21
Depending on the networking configuration of the system, the CMN or CAN networks may not be present in SLS network data. No IP addresses will be allocated for networks that do not exist in SLS.
(ncn-mw#) Allocate IP addresses for the NCN in SLS and HSM by adding the --perform-changes argument to the command in the previous step.
./add_management_ncn.py allocate-ips --xname "$XNAME" --alias "$NODE" --perform-changes
Example output:
IP Addressees have been allocated for x3000c0s36b0n0 (ncn-s004) and been added to SLS and BSS
=================================
Management NCN IP Allocation
=================================
Network | IP Address
--------|-----------
CMN | 10.103.11.42
CAN | 10.102.4.10
HMN | 10.254.1.14
MTL | 10.1.1.7
NMN | 10.252.1.9
=================================
Management NCN BMC IP Allocation
=================================
Network | IP Address
--------|-----------
HMN | 10.254.1.21
Proceed to the next step to Add Switch Configuration or return to the main Add, Remove, Replace, or Move NCNs page.