Set NCN User Passwords

The management node images do not contain a default root password or default SSH keys.

Use one of these methods to change or set the root password in the image.

The rest of this procedure describes how to change the root password stored in the HashiCorp Vault instance and then apply it immediately to management nodes with the csm.password Ansible role via a CFS session. The same root password from Vault will be applied anytime that the NCN personalization including the CSM layer is run. If no password is added to Vault as in the procedure below, this Ansible role will skip any password updates.

Changed in CSM release 1.2.0

The location of the password secret in Vault changed in CSM version 1.2. Prior to that CSM version, the location was secret/csm/management_nodes root_password=.... Starting in CSM version 1.2, the location is secret/csm/users/root password=....

Procedure: Configure root password in Vault

  1. (linux#) Generate a new password hash for the root user.

    This script uses read -s to prevent the password from being echoed to the screen or saved in the shell history. It unsets the plaintext password variables at the end, so that they cannot be viewed later.

    read -r -s -p "New root password for NCN images: " PW1 ; echo ; if [[ -z ${PW1} ]]; then
    echo "ERROR: Password cannot be blank"
else
    read -r -s -p "Enter again: " PW2
    echo
    if [[ ${PW1} != ${PW2} ]]; then
        echo "ERROR: Passwords do not match"        
    else
        echo -n "${PW1}" | openssl passwd -6 -salt $(< /dev/urandom tr -dc ./A-Za-z0-9 | head -c4) --stdin
    fi
fi ; unset PW1 PW2

  2. (ncn-mw#) Get the HashiCorp Vault root token.

    kubectl get secrets -n vault cray-vault-unseal-keys -o jsonpath='{.data.vault-root}' | base64 -d; echo

  3. Write the password hash to the HashiCorp Vault.

    WARNING: The CSM instance of Vault does not support the patch operation. Ensure that if the password field in the secret/csm/users/root secret is being updated, then any other desired fields are also included in the write command. For example the user’s SSH keys. See SSH keys. Any fields omitted from the write command will be cleared from Vault.

    The path to the secret and the password field are configurable locations in the CSM csm.password Ansible role located in the CSM configuration management Git repository that is in use. If not using the defaults as shown in the command examples, ensure that the paths are consistent between Vault and the values in the Ansible role. See roles/csm.password in the repository for more information.

    1. (ncn-mw#) Open an interactive shell in the Vault Kubernetes pod.

      kubectl exec -itn vault cray-vault-0 -c vault -- sh

    2. (cray-vault#) Write the password hash to Vault.

      • The vault login command will request the token value from the output of the previous step.
      • Use the password hash generated in the earlier step.
        • NOTE: It is important to enclose the hash in single quotes to preserve any special characters.
      • The vault read command allows the administrator to verify that the contents of the secret were stored correctly.
      export VAULT_ADDR=http://cray-vault:8200
vault login
vault write secret/csm/users/root password='<INSERT HASH HERE>' [... other fields (see warning above) ...]
vault read secret/csm/users/root
exit

Procedure: Apply root password to NCNs (standalone)

Use the following procedure with the rotate-pw-mgmt-nodes.yml playbook to only change the root password on NCNs. This is a quick alternative to running a full management NCN personalization, as documented in the Re-run node personalization on management nodes procedure in the Management Node Personalization topic.

  1. (ncn-mw#) Create a CFS configuration layer to run the password change Ansible playbook.

    NOTE This step only needs to be done once, as long as the commit in the CSM configuration management Git repository has not changed. If the commit has not changed since the last time this step was run, this step may be skipped, because the previously created CFS configuration will still work.

    1. Create a file containing only this CFS configuration layer.

      The file contents should be as follows, except replace the <INSERT GIT COMMIT ID> text with the commit in the CSM configuration management Git repository that is in use.

      {
  "layers": [
    {
      "name": "ncn-password-update",
      "clone_url": "https://api-gw-service-nmn.local/vcs/cray/csm-config-management.git",
      "playbook": "rotate-pw-mgmt-nodes.yml",
      "commit": "<INSERT GIT COMMIT ID>"
    }
  ]
}

    2. Create the ncn-password-update configuration in CFS.

      Replace the <INSERT FILE PATH HERE> text with the path to the file created in the previous step. If a CFS configuration already exists with this name, the following command will overwrite it.

      cray cfs v3 configurations update ncn-password-update --file <INSERT FILE PATH HERE>

  2. (ncn-mw#) Create a CFS configuration session to apply the password update.

    cray cfs v3 sessions create --name ncn-password-update-`date +%Y%m%d%H%M%S` --configuration-name ncn-password-update

  3. Monitor the CFS session.

    See Track the Status of a Session.

Procedure for other users

The csm.password Ansible role supports setting passwords for non-root users.

  1. Make a copy of the rotate-pw-mgmt-nodes.yml Ansible playbook and modify the role variables to specify a different password_username.

  2. Using that username, add the hashed password to Vault.

    Follow Procedure: Configure root password in Vault.

  3. Create a configuration layer using the new Ansible playbook and create a CFS session using that layer.