Add a Volume to UAS

NOTE: UAS is deprecated in CSM 1.5.2 and will be removed in CSM 1.6.

This procedure registers and configures a volume in UAS so that the volume can be mounted in UAIs.

See List Volumes Registered in UAS for examples of valid volume configurations. Refer to Elements of a UAI for descriptions of the volume configuration fields and values.

Note the following caveats about adding volumes to UAS:

  1. A volume description may specify an underlying directory that is NFS-mounted on the UAI host nodes. Hard-mounted NFS file systems will stop responding indefinitely on references to their mount points if the NFS server fails or becomes unreachable from the UAI host node. This will cause new UAI creation and migration of existing UAIs to stop responding as well until the NFS issue is remedied.
  2. Multiple volumes can be configured in UAS with the same mount_path. UAS cannot create a UAI if that UAI has more than one volume specified for a given mount_path. If multiple volumes with the same mount_path exist in the UAS configuration all UAIs must be created using UAI classes that specify a workable subset of volumes. A UAI created without a UAI Class under such a UAS configuration will try to use all configured volumes and creation will fail.
  3. The volumename is a string that can describe or name the volume. It must be composed of only lowercase letters, numbers, and dashes (’-’). The volumename also must begin and end with an alphanumeric character.
  4. As with UAI images, registering a volume with UAS creates the configuration that will be used to create a UAI. If the underlying object referred to by the volume does not exist at the time the UAI is created, the UAI will, in most cases, wait until the object becomes available before starting up. This will be visible in the UAI state which will eventually move to and remain in Waiting until the underlying issue is resolved.

Prerequisites

  • The administrator must be logged into an NCN or a host that has administrative access to the HPE Cray EX System API Gateway
  • The administrator must have the HPE Cray EX System CLI (cray command) installed on the above host
  • The HPE Cray EX System CLI must be configured (initialized - cray init command) to reach the HPE Cray EX System API Gateway
  • The administrator must be logged in as an administrator to the HPE Cray EX System CLI (cray auth login command)
  • The underlying resources for the volume should be available in the Kubernetes namespace where they will be referenced

Procedure

To create a volume, follow this procedure.

  1. Use the cray CLI to create the volume, specifying volumename, mount_path, and volume_description.

    Note difference between the UAS name for the volume type and the Kubernetes name for that type. Kubernetes uses camelCase for its type names, while UAS uses lower_case_with_underscores.

    ncn-m001-cray uas admin config volumes create --mount-path <path in UAI> --volume-description '{"<volume-kind>": <k8s-volume-description>}' --volumename '<string>'

    For example:

    ncn-m001-cray uas admin config volumes create --mount-path /host_files/host_passwd --volume-description '{"host_path": {"path": "/etc/passwd", "type": "FileOrCreate"}}' --volumename 'my-volume-with-passwd-from-the-host-node'

    The example above will create a directory /host_files in every UAI configured to use this volume and mount the file /etc/passwd from the host node into that directory as a file named host_passwd. Notice the form of the --volume-description argument. It is a JSON string encapsulating an entire volume_description field as shown in the JSON output in the previous section.

  2. Perform List Volumes Registered in UAS to verify that the new volume is configured.

    The new volume appears in the output of the cray uas admin config volumes list command.

Top: User Access Service (UAS)

Next Topic: Obtain Configuration of a UAS Volume