Cray System Management Documentation > Cray System Management (CSM) Administration Guide > User Access Service (UAS) > Delete a Volume Configuration

Delete a Volume Configuration

NOTE: UAI is deprecated in CSM 1.5.2 and will be removed in CSM 1.6.

Delete an existing volume configuration. This procedure does not delete the underlying object referred to by the UAS volume configuration.

Prerequisites

The administrator must be logged into an NCN or a host that has administrative access to the HPE Cray EX System API Gateway
The administrator must have the HPE Cray EX System CLI (cray command) installed on the above host
The HPE Cray EX System CLI must be configured (initialized - cray init command) to reach the HPE Cray EX System API Gateway
The administrator must be logged in as an administrator to the HPE Cray EX System CLI (cray auth login command)
The administrator must know the Volume ID of the UAS volume to be deleted: List Volumes Registered in UAS

Delete the target volume configuration.

To delete a UAS Volume, use a command of the following form:

ncn-m001-cray uas admin config volumes delete <volume-id>

For example:

ncn-m001-cray uas admin config volumes delete a0066f48-9867-4155-9268-d001a4430f5c

If wanted, perform List Volumes Registered in UAS to confirm that the UAS volume has been deleted.