Cray System Management Documentation > REST API Documentation > Firmware Action Service v1

Firmware Action Service v1

Scroll down for code samples, example requests and responses. Select a language for code samples from the tabs above or the mobile navigation menu.

The Firmware Action Service (FAS) provides a common interface for managing the firmware versions of hardware in a system via Redfish. FAS tracks and performs actions like upgrade, downgrade, create or restore snapshots for system firmware. FAS processes an image list, which is a json file containing firmware versions for each component on a node.

The firmware RPM’s are provided by HPE and installed during installation. The firmware RPM contains the firmware image and the image list. FAS uses the cray-fas-loader (Kubernetes job) to upload firmware images from the RPMs (stored in Nexus) to the artifact repository (S3) and to create the image list in FAS during installation. Note that FAS is a successor to FUS (firmware update service) that was available with earlier versions and offers several enhancements over FUS.

Resources

/images

Maintain the image list. Use this resource to update, replace, or return the image list.

/service/status, /service/version, /service/status/details

Return status and version information for the Firmware Action Service itself.

/actions

Initiate a firmware action. An action is a collection of operations initiated by user request to update the firmware images on a set of hardware. Example: Update the gigabyte BMC targets to the latest version.

/snapshots

Stores current version information for all nodes or restores targets to the stored version level. A snapshot is a point-in-time record of what firmware images were running on the system (a device’s targets), constrained by user defined parameters (xname, model/manufacturer, etc). Snapshots can be used to restore the system back to specific firmware versions.

Parameters

xname refers to the node.
target is a component on a node and is case sensitive.
tag is a label applied to firmware images, it is part of the unique identifier for an image; deviceType, manufacturer, model, target, semanticFirmwareVersion, tag.

Workflow

Update firmware for all targets at xname and check status

POST /actions

Before updating firmware, administrator must consider firmware dependencies between different components and determine the update sequence. For example, firmware of one component may need to be updated before firmware for another component can be updated. Upgrade/downgrade/set firmware to an explicit version for all components on the node identified by xname. Upon success, the string response contains an action ID which can be used to query the status of the firmware action. For example, the response to a successful POST /actions provides actionID:

{"actionID": "fcac1eec-e93b-4549-90aa-6a59fda0f4c6",
 "overrideDryrun": true,
}

The actionID is used to submit a request for the status of the action:

GET .../v1/actions/fcac1eec-e93b-4549-90aa-6a59fda0f4c6

Dry run helps to determine what firmware can be updated for all components on the node identified by xname. You need to enter values like xname, version etc. in a JSON payload. Ensure that the overrideDryrun parameter is set to false (default value) so that the dry run occurs.

GET /actions/{actionID}

Retrieve information for a specific action ID.

GET /actions/{actionID}/status

Retrieve status for a specific action ID.

GET /actions/{actionID}/operations

Retrieve details for a specific action ID.

GET /operations/{operationID}

Retrieve detailed information for a specific operationID.

Create a snapshot to capture the firmware version for selected devices

POST /snapshots

You can create a snapshot to record the firmware versions for targets on specific devices. Upon success, the response includes the snapshot name.

GET/snapshots/{snapshotName}

Retrieve details of the snapshot that you created. Retrieve details about the specific snapshot by providing the snapshot name. In the response body, look under devices > targets > imageID and check the imageID. Ensure that the imageID is non-zero. Note that if imageID is a string of zeros like “00000000-0000-0000-0000-000000000000”, it implies that there is no image associated with this snapshot. Restoring this snapshot does not lead to any results as there is no image to restore.

Restore a snapshot

POST /snapshots/{snapshotName}/restore

Use this API to restore an existing snapshot by replacing selected components (device + target) with the stored firmware version. Enter the snapshot name as a path parameter. Upon success, the string response contains an action ID which can be used to query the status of the restore.

GET /actions/{actionID}

Using the response from the update, retrieve status of restore for a specific action ID.

Interactions with other APIs

FAS receives information from the Hardware State Manager (HSM) for each xname.

Base URLs:

https://api-gw-service-nmn.local/apis/fas/v1

Authentication

HTTP Authentication, scheme: bearer

actions

get__actions

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/actions HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/actions \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/actions', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/actions", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /actions

Retrieve all firmware action sets with summary information

Retrieve all valid action IDs along with start time, and end time for completed and in-progress actions.

Example responses

200 Response

{
  "actions": [
    {
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
      "overrideDryrun": true,
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "running",
      "operationCounts": {
        "total": 100,
        "initial": 0,
        "configured": 0,
        "blocked": 0,
        "needsVerified": 0,
        "verifying": 0,
        "inProgress": 32,
        "failed": 10,
        "success": 58,
        "noSolution": 4,
        "noOperation": 6,
        "aborted": 0,
        "unknown": 0
      },
      "description": "string",
      "blockedBy": [
        "497f6eca-6276-4993-bfeb-53cbbbba6f08"
      ],
      "errors": [
        "string"
      ]
    }
  ]
}

Responses

Status	Meaning	Description	Schema
200	OK	OK	ActionSummarys

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

post__actions

Code samples

POST https://api-gw-service-nmn.local/apis/fas/v1/actions HTTP/1.1
Host: api-gw-service-nmn.local
Content-Type: application/json
Accept: application/json

# You can also use wget
curl -X POST https://api-gw-service-nmn.local/apis/fas/v1/actions \
  -H 'Content-Type: application/json' \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Content-Type': 'application/json',
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.post('https://api-gw-service-nmn.local/apis/fas/v1/actions', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Content-Type": []string{"application/json"},
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("POST", "https://api-gw-service-nmn.local/apis/fas/v1/actions", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

POST /actions

Update firmware on the system

Perform a firmware action across the system. Upon success, the string response contains an action ID which can be used to query the status of the update.

For example, the response to a successful POST /actions is the following: {“actionID”: “fcac1eec-e93b-4549-90aa-6a59fda0f4c6”, “overrideDryrun”: true}, actionID is the ID to reference the action; performing a GET …/v1/actions/fcac1eec-e93b-4549-90aa-6a59fda0f4c6 will return status information on the action and its collection of operations

The parameters are logically AND’d. The parameters are broken into: location, type, level. The command parameters will FORCE an action or override a dryrun.

stateComponentFilter: -> determines the xnames to run on

xnames
partitions
groups
deviceTypes

inventoryHardwareFilter: -> determines the xnames to run on by comparison of the ’type’ information

manufacturer
model

targetFilter: -> determines the targets to run on

targets

imageFilter: -> can specify a specific image uuid to use.

imageID

commands:

overrideDryrun -> option to perform an update. The default value of this parameter is false, which will cause a dryrun to be executed. The dry run checks if a newer firmware version exists without actually performing the update operation. FAS will only update the system if this parameter is set to true. Note that leaving this blank or misspelling true is considered false resulting in a dry run to be performed.
restoreNotPossibleOverride -> override to force update for hardware that does not have an identified FROM image and therefore cannot be rolled back to. FAS will not perform an update if the currently running firmware is not available in the images repository.
tag -> the tag associated with the images to update to. default is the default tag.
timeLimit -> time in seconds to let any operation execute
description
version - latest, earliest, explicit (used in conjunction with imageFilter)
overwriteSameImage -> If the ‘fromFirmwareVersion’ and ‘toFirmwareVersion’ of an operation are the same, FAS will not update the firmware image on the device. Setting this parameter to ‘true’ causes FAS to send the update command to the device. It cannot be verified via FAS if the firmware image was updated. Also note that FAS will send the update command to the device, but some devices are smart enough to realize the same image and not execute the command.

Body parameter

{
  "stateComponentFilter": {
    "xnames": [
      "x0c0s0b0",
      "x0c0s2b0"
    ],
    "partitions": [
      "p1"
    ],
    "groups": [
      "red",
      "blue"
    ],
    "deviceTypes": [
      "nodeBMC"
    ]
  },
  "inventoryHardwareFilter": {
    "manufacturer": "cray",
    "model": "c5000"
  },
  "imageFilter": {
    "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
    "overrideImage": true
  },
  "targetFilter": {
    "targets": [
      "BIOS",
      "BMC"
    ]
  },
  "command": {
    "version": "latest",
    "tag": "default",
    "overrideDryrun": true,
    "restoreNotPossibleOverride": true,
    "overwriteSameImage": true,
    "timeLimit": 10000,
    "description": "update cabinet xxxx"
  }
}

Parameters

Name	In	Type	Required	Description
body	body	ActionParameters	true	Optional description in Markdown

Example responses

201 Response

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "overrideDryrun": true
}

404 Response

Responses

Status	Meaning	Description	Schema
201	Created	Created	ActionID
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__actions_{actionID}

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID} \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /actions/{actionID}

Retrieve detailed information for a firmware action set

Retrieve detailed information for a firmware action set specified by actionID.

Parameters

Name	In	Type	Required	Description
actionID	path	string(uuid)	true	none

Example responses

200 Response

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "running",
  "description": "string",
  "operationSummary": {
    "initial": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "configured": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "blocked": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "needsVerified": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "verifying": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "inProgress": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "failed": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "success": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "noSolution": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "noOperation": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "aborted": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "unknown": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ]
  },
  "overrideDryrun": true,
  "parameters": {
    "stateComponentFilter": {
      "xnames": [
        "x0c0s0b0",
        "x0c0s2b0"
      ],
      "partitions": [
        "p1"
      ],
      "groups": [
        "red",
        "blue"
      ],
      "deviceTypes": [
        "nodeBMC"
      ]
    },
    "inventoryHardwareFilter": {
      "manufacturer": "cray",
      "model": "c5000"
    },
    "imageFilter": {
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "overrideImage": true
    },
    "targetFilter": {
      "targets": [
        "BIOS",
        "BMC"
      ]
    },
    "command": {
      "version": "latest",
      "tag": "default",
      "overrideDryrun": true,
      "restoreNotPossibleOverride": true,
      "overwriteSameImage": true,
      "timeLimit": 10000,
      "description": "update cabinet xxxx"
    }
  },
  "blockedBy": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ],
  "errors": [
    "string"
  ]
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	Action
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

delete__actions_{actionID}

Code samples

DELETE https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/error

# You can also use wget
curl -X DELETE https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID} \
  -H 'Accept: application/error' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/error',
  'Authorization': 'Bearer {access-token}'
}

r = requests.delete('https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/error"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("DELETE", "https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

DELETE /actions/{actionID}

Delete all information about a completed firmware action set

Delete all information about a completed firmware action set.

Parameters

Name	In	Type	Required	Description
actionID	path	string(uuid)	true	none

Example responses

400 Response

Responses

Status	Meaning	Description	Schema
204	No Content	Deleted - no content	None
400	Bad Request	cannot delete a running action	Problem7807
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

delete__actions_{actionID}_instance

Code samples

DELETE https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/instance HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X DELETE https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/instance \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.delete('https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/instance', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("DELETE", "https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/instance", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

DELETE /actions/{actionID}/instance

Abort a running firmware action set

Abort a running firmware action set. Stops all actions in progress (will not rollback)

Parameters

Name	In	Type	Required	Description
actionID	path	string(uuid)	true	none

Example responses

404 Response

{
  "type": "about:blank",
  "detail": "Detail about this specific problem occurrence. See RFC7807",
  "instance": "",
  "status": 400,
  "title": "Description of HTTP Status code, e.g. 400"
}

Responses

Status	Meaning	Description	Schema
200	OK	Action already finalized	None
202	Accepted	Aborting action	None
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__actions_{actionID}_status

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/status HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/status \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/status', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/status", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /actions/{actionID}/status

Retrieve summary information of a firmware action set

Retrieve summary information of a firmware action set.

Parameters

Name	In	Type	Required	Description
actionID	path	string(uuid)	true	none

Example responses

200 Response

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
  "overrideDryrun": true,
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "running",
  "operationCounts": {
    "total": 100,
    "initial": 0,
    "configured": 0,
    "blocked": 0,
    "needsVerified": 0,
    "verifying": 0,
    "inProgress": 32,
    "failed": 10,
    "success": 58,
    "noSolution": 4,
    "noOperation": 6,
    "aborted": 0,
    "unknown": 0
  },
  "description": "string",
  "blockedBy": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ],
  "errors": [
    "string"
  ]
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ActionSummary
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__actions_{actionID}_operations

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /actions/{actionID}/operations

Retrieve detailed information of a firmware action set

Retrieve detailed information of a firmware action set.

Parameters

Name	In	Type	Required	Description
actionID	path	string(uuid)	true	none

Example responses

200 Response

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "running",
  "description": "string",
  "operationSummary": {
    "initial": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "configured": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "blocked": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "needsVerified": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "verifying": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "inProgress": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "failed": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "success": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "noSolution": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "noOperation": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "aborted": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "unknown": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ]
  },
  "overrideDryrun": true,
  "parameters": {
    "stateComponentFilter": {
      "xnames": [
        "x0c0s0b0",
        "x0c0s2b0"
      ],
      "partitions": [
        "p1"
      ],
      "groups": [
        "red",
        "blue"
      ],
      "deviceTypes": [
        "nodeBMC"
      ]
    },
    "inventoryHardwareFilter": {
      "manufacturer": "cray",
      "model": "c5000"
    },
    "imageFilter": {
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "overrideImage": true
    },
    "targetFilter": {
      "targets": [
        "BIOS",
        "BMC"
      ]
    },
    "command": {
      "version": "latest",
      "tag": "default",
      "overrideDryrun": true,
      "restoreNotPossibleOverride": true,
      "overwriteSameImage": true,
      "timeLimit": 10000,
      "description": "update cabinet xxxx"
    }
  },
  "blockedBy": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ],
  "errors": [
    "string"
  ]
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ActionDetail
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__actions_{actionID}operations{operationID}

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations/{operationID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations/{operationID} \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations/{operationID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/actions/{actionID}/operations/{operationID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /actions/{actionID}/operations/{operationID}

Retrieve detailed information of a firmware operation.

Retrieve detailed information of a firmware operation.

Parameters

Name	In	Type	Required	Description
actionID	path	string(uuid)	true	none
operationID	path	string(uuid)	true	none

Example responses

200 Response

{
  "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "initial",
  "error": "string",
  "xname": "x0c0s2b0",
  "deviceType": "nodeBMC",
  "target": "bmc",
  "targetName": "bmc",
  "manufacturer": "cray",
  "model": "c5000",
  "softwareId": "string",
  "fromFirmwareVersion": "fw123.873US",
  "fromSemanticFirmwareVersion": "1.25.10",
  "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
  "fromTag": "default",
  "toFirmwareVersion": "fw456",
  "toSemanticFirmwareVersion": "1.35.0",
  "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
  "toTag": "recovery"
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	Operation
404	Not Found	action set not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__operations_{operationID}

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/operations/{operationID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/operations/{operationID} \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/operations/{operationID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/operations/{operationID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /operations/{operationID}

Retrieve detailed information of a firmware operation.

Retrieve detailed information of a firmware operation.

Parameters

Name	In	Type	Required	Description
operationID	path	string(uuid)	true	none

Example responses

200 Response

{
  "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "initial",
  "error": "string",
  "xname": "x0c0s2b0",
  "deviceType": "nodeBMC",
  "target": "bmc",
  "targetName": "bmc",
  "manufacturer": "cray",
  "model": "c5000",
  "softwareId": "string",
  "fromFirmwareVersion": "fw123.873US",
  "fromSemanticFirmwareVersion": "1.25.10",
  "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
  "fromTag": "default",
  "toFirmwareVersion": "fw456",
  "toSemanticFirmwareVersion": "1.35.0",
  "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
  "toTag": "recovery"
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	Operation
404	Not Found	operation not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

images

post__images

Code samples

POST https://api-gw-service-nmn.local/apis/fas/v1/images HTTP/1.1
Host: api-gw-service-nmn.local
Content-Type: application/json
Accept: application/json

# You can also use wget
curl -X POST https://api-gw-service-nmn.local/apis/fas/v1/images \
  -H 'Content-Type: application/json' \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Content-Type': 'application/json',
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.post('https://api-gw-service-nmn.local/apis/fas/v1/images', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Content-Type": []string{"application/json"},
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("POST", "https://api-gw-service-nmn.local/apis/fas/v1/images", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

POST /images

Create a new image record

Create a new image record

Body parameter

{
  "deviceType": "nodeBMC",
  "manufacturer": "cray",
  "models": [
    [
      "c5000",
      "c5001"
    ]
  ],
  "target": "BIOS",
  "softwareIds": [
    "string"
  ],
  "tags": [
    [
      "recovery",
      "default"
    ]
  ],
  "firmwareVersion": "f1.123.24xz",
  "semanticFirmwareVersion": "1.2.252",
  "updateURI": "string",
  "needManualReboot": true,
  "waitTimeBeforeManualRebootSeconds": 0,
  "waitTimeAfterRebootSeconds": 0,
  "pollingSpeedSeconds": 0,
  "forceResetType": "string",
  "s3URL": "s3://firmware/f1.1123.24.xz.iso",
  "allowableDeviceStates": [
    "ON"
  ]
}

Parameters

Name	In	Type	Required	Description
body	body	ImageCreate	true	a firmware image record

Example responses

200 Response

{
  "imageID": "00000000-0000-0000-0000-000000000000"
}

400 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ImageID
400	Bad Request	Bad request	Problem7807
409	Conflict	Imaage Record Already Exists	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__images

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/images HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/images \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/images', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/images", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /images

Retrieve a list of images known to the system

Retrieve a list of images that are known to the system.

Example responses

200 Response

{
  "images": [
    {
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "createTime": "2019-08-24T14:15:22Z",
      "deviceType": "nodeBMC",
      "manufacturer": "cray",
      "models": [
        "c5000"
      ],
      "target": "BIOS",
      "softwareIds": [
        "string"
      ],
      "tags": [
        [
          "recovery",
          "default"
        ]
      ],
      "firmwareVersion": "f1.123.24xz",
      "semanticFirmwareVersion": "1.2.252",
      "updateURI": "string",
      "needManualReboot": true,
      "waitTimeBeforeManualRebootSeconds": 0,
      "waitTimeAfterRebootSeconds": 0,
      "pollingSpeedSeconds": 0,
      "forceResetType": "string",
      "s3URL": "s3://firmware/f1.1123.24.xz.iso",
      "allowableDeviceStates": [
        "ON"
      ]
    }
  ]
}

Responses

Status	Meaning	Description	Schema
200	OK	OK	ImageList

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

put__images_{imageID}

Code samples

PUT https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID} HTTP/1.1
Host: api-gw-service-nmn.local
Content-Type: application/json
Accept: application/error

# You can also use wget
curl -X PUT https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID} \
  -H 'Content-Type: application/json' \
  -H 'Accept: application/error' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Content-Type': 'application/json',
  'Accept': 'application/error',
  'Authorization': 'Bearer {access-token}'
}

r = requests.put('https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Content-Type": []string{"application/json"},
        "Accept": []string{"application/error"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("PUT", "https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

PUT /images/{imageID}

Update the image record

Modify or update an existing image record.

Body parameter

{
  "deviceType": "nodeBMC",
  "manufacturer": "cray",
  "models": [
    [
      "c5000",
      "c5001"
    ]
  ],
  "target": "BIOS",
  "softwareIds": [
    "string"
  ],
  "tags": [
    [
      "recovery",
      "default"
    ]
  ],
  "firmwareVersion": "f1.123.24xz",
  "semanticFirmwareVersion": "1.2.252",
  "updateURI": "string",
  "needManualReboot": true,
  "waitTimeBeforeManualRebootSeconds": 0,
  "waitTimeAfterRebootSeconds": 0,
  "pollingSpeedSeconds": 0,
  "forceResetType": "string",
  "s3URL": "s3://firmware/f1.1123.24.xz.iso",
  "allowableDeviceStates": [
    "ON"
  ]
}

Parameters

Name	In	Type	Required	Description
imageID	path	string(uuid)	true	none
body	body	ImageCreate	true	image record

Example responses

400 Response

Responses

Status	Meaning	Description	Schema
200	OK	Updated	None
201	Created	Created	None
400	Bad Request	Bad Request	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__images_{imageID}

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID} \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /images/{imageID}

Retrieve the image record

Retrieve the image record that is associated with the imageID.

Parameters

Name	In	Type	Required	Description
imageID	path	string(uuid)	true	none

Example responses

200 Response

{
  "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
  "createTime": "2019-08-24T14:15:22Z",
  "deviceType": "nodeBMC",
  "manufacturer": "cray",
  "models": [
    "c5000"
  ],
  "target": "BIOS",
  "softwareIds": [
    "string"
  ],
  "tags": [
    [
      "recovery",
      "default"
    ]
  ],
  "firmwareVersion": "f1.123.24xz",
  "semanticFirmwareVersion": "1.2.252",
  "updateURI": "string",
  "needManualReboot": true,
  "waitTimeBeforeManualRebootSeconds": 0,
  "waitTimeAfterRebootSeconds": 0,
  "pollingSpeedSeconds": 0,
  "forceResetType": "string",
  "s3URL": "s3://firmware/f1.1123.24.xz.iso",
  "allowableDeviceStates": [
    "ON"
  ]
}

400 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ImageGet
400	Bad Request	Bad Request	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

delete__images_{imageID}

Code samples

DELETE https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/error

# You can also use wget
curl -X DELETE https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID} \
  -H 'Accept: application/error' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/error',
  'Authorization': 'Bearer {access-token}'
}

r = requests.delete('https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/error"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("DELETE", "https://api-gw-service-nmn.local/apis/fas/v1/images/{imageID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

DELETE /images/{imageID}

Delete an image record

Deletes an image record from the FAS datastore. Does not delete the actual image from S3.

Parameters

Name	In	Type	Required	Description
imageID	path	string(uuid)	true	none

Example responses

400 Response

Responses

Status	Meaning	Description	Schema
204	No Content	Successful delete	None
400	Bad Request	Bad Request	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

service

get__service_status

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/service/status HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/service/status \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/service/status', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/service/status", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /service/status

Retrieve service status

Retrieve the status of the Firmware Action Service.

Example responses

200 Response

{
  "serviceStatus": "running"
}

500 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ServiceStatus
500	Internal Server Error	Internal Server Error	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__service_status_details

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/service/status/details HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/service/status/details \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/service/status/details', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/service/status/details", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /service/status/details

Retrieve service status details

Retrieve the status of the Firmware Action Service. HSM, ETCD, Service Status and Version are returned.

Example responses

200 Response

{
  "serviceVersion": "1.2.0",
  "serviceStatus": "running",
  "hmsStatus": "connected",
  "storageStatus": "connected"
}

500 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ServiceStatusDetails
500	Internal Server Error	Internal Server Error	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__service_version

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/service/version HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/service/version \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/service/version', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/service/version", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /service/version

Retrieve the service version

Retrieve the internal version of FAS.

Example responses

200 Response

{
  "serviceVersion": "1.2.0"
}

500 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	ServiceVersion
500	Internal Server Error	Internal Server Error	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

snapshots

get__snapshots

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/snapshots HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/snapshots \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/snapshots', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/snapshots", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /snapshots

Return summary of all stored snapshots

Return summary of all stored snapshots

Example responses

200 Response

{
  "snapshots": [
    {
      "name": "pre_system_upgrade",
      "captureTime": "2019-08-24T14:15:22Z",
      "expirationTime": "2019-08-24T14:15:22Z",
      "ready": false,
      "relatedActions": [
        {
          "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
          "startTime": "2019-08-24T14:15:22Z",
          "endTime": "2019-08-24T14:15:22Z",
          "state": "completed"
        }
      ],
      "uniqueDeviceCount": 0
    }
  ]
}

500 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	SnapshotAll
500	Internal Server Error	Internal server error	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

post__snapshots

Code samples

POST https://api-gw-service-nmn.local/apis/fas/v1/snapshots HTTP/1.1
Host: api-gw-service-nmn.local
Content-Type: application/json
Accept: application/json

# You can also use wget
curl -X POST https://api-gw-service-nmn.local/apis/fas/v1/snapshots \
  -H 'Content-Type: application/json' \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Content-Type': 'application/json',
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.post('https://api-gw-service-nmn.local/apis/fas/v1/snapshots', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Content-Type": []string{"application/json"},
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("POST", "https://api-gw-service-nmn.local/apis/fas/v1/snapshots", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

POST /snapshots

Create a system snapshot

Records a snapshot of the firmware versions for every target for every device that matches the query parameters.

Body parameter

{
  "name": "20200402_all_xnames",
  "expirationTime": "2019-08-24T14:15:22Z",
  "stateComponentFilter": {
    "xnames": [
      "x0c0s0b0",
      "x0c0s2b0"
    ],
    "partitions": [
      "p1"
    ],
    "groups": [
      "red",
      "blue"
    ],
    "deviceTypes": [
      "nodeBMC"
    ]
  },
  "inventoryHardwareFilter": {
    "manufacturer": "cray",
    "model": "c5000"
  },
  "targetFilter": {
    "targets": [
      "BIOS",
      "BMC"
    ]
  }
}

Parameters

Name	In	Type	Required	Description
body	body	SnapshotParameters	true	Optional description in Markdown

Example responses

201 Response

{
  "name": "20200402_all_xnames"
}

409 Response

Responses

Status	Meaning	Description	Schema
201	Created	OK	SnapshotID
409	Conflict	Duplicate, key already exists	Problem7807

Response Headers

Status	Header	Type	Format	Description
201	Location	string		location of snapshot

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__snapshots_{snapshotName}

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName} \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /snapshots/{snapshotName}

Retrieve a snapshot

Retrieve a snapshot of the system

Parameters

Name	In	Type	Required	Description
snapshotName	path	string	true	none

Example responses

200 Response

{
  "name": "string",
  "captureTime": "2019-08-24T14:15:22Z",
  "expirationTime": "2019-08-24T14:15:22Z",
  "ready": false,
  "relatedActions": [
    {
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "completed"
    }
  ],
  "devices": [
    {
      "xname": "x0c0s2b0",
      "targets": [
        {
          "name": "BIOS",
          "firmwareVersion": "fw123.8s",
          "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
          "error": "string"
        }
      ],
      "error": "string"
    }
  ],
  "parameters": {
    "name": "20200402_all_xnames",
    "expirationTime": "2019-08-24T14:15:22Z",
    "stateComponentFilter": {
      "xnames": [
        "x0c0s0b0",
        "x0c0s2b0"
      ],
      "partitions": [
        "p1"
      ],
      "groups": [
        "red",
        "blue"
      ],
      "deviceTypes": [
        "nodeBMC"
      ]
    },
    "inventoryHardwareFilter": {
      "manufacturer": "cray",
      "model": "c5000"
    },
    "targetFilter": {
      "targets": [
        "BIOS",
        "BMC"
      ]
    }
  },
  "errors": [
    "string"
  ]
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	Snapshot
404	Not Found	Not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

delete__snapshots_{snapshotName}

Code samples

DELETE https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/error

# You can also use wget
curl -X DELETE https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName} \
  -H 'Accept: application/error' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/error',
  'Authorization': 'Bearer {access-token}'
}

r = requests.delete('https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/error"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("DELETE", "https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

DELETE /snapshots/{snapshotName}

Delete a snapshot

Delete a snapshot of the system. Does not delete any firmware images from S3.

Parameters

Name	In	Type	Required	Description
snapshotName	path	string	true	none

Example responses

404 Response

Responses

Status	Meaning	Description	Schema
204	No Content	Successful delete	None
404	Not Found	Not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

post__snapshots_{snapshotName}_restore

Code samples

POST https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}/restore?confirm=yes HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X POST https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}/restore?confirm=yes \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.post('https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}/restore', params={
  'confirm': 'yes'
}, headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("POST", "https://api-gw-service-nmn.local/apis/fas/v1/snapshots/{snapshotName}/restore", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

POST /snapshots/{snapshotName}/restore

Restore system snapshot

Restore a snapshot by replacing each component (device + target) with the stored version. Note that you are prompted for a confirmation.

Parameters

Name	In	Type	Required	Description
snapshotName	path	string	true	none
overrideDryrun	query	boolean	false	Note that leaving this blank or misspelling true is considered false resulting in a dryrun restore action to be performed. You must specify true to force an actual update
confirm	query	string	true	none
timeLimit	query	integer	false	time limit in seconds that any operation for a firmware action may be allowed to attempt to complete.

Example responses

202 Response

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "overrideDryrun": true
}

400 Response

Responses

Status	Meaning	Description	Schema
202	Accepted	request to restore accepted. Creating firmware action set	ActionID
400	Bad Request	Bad Request	Problem7807
404	Not Found	Snapshot name not found	Problem7807

Response Headers

Status	Header	Type	Format	Description
202	Location	string	uuid	actionID of the created firmware action set

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

loader

post__loader

Code samples

POST https://api-gw-service-nmn.local/apis/fas/v1/loader HTTP/1.1
Host: api-gw-service-nmn.local
Content-Type: application/octet-stream
Accept: application/json

# You can also use wget
curl -X POST https://api-gw-service-nmn.local/apis/fas/v1/loader \
  -H 'Content-Type: application/octet-stream' \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Content-Type': 'application/octet-stream',
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.post('https://api-gw-service-nmn.local/apis/fas/v1/loader', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Content-Type": []string{"application/octet-stream"},
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("POST", "https://api-gw-service-nmn.local/apis/fas/v1/loader", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

POST /loader

Upload a file to be processed by the loader

Upload a file for the loader to add to S3 and create a FAS compatible image record

Body parameter

string

Parameters

Name	In	Type	Required	Description
body	body	string(binary)	false	none

Example responses

200 Response

{
  "loaderRunID": "3b7e76fb-4b2e-45d8-9266-664b8966d691"
}

400 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	LoaderRunID
400	Bad Request	Bad Request - No file found	Problem7807
415	Unsupported Media Type	Unsupported Media Type	Problem7807
429	Too Many Requests	Loader busy, try again later	Problem7807
500	Internal Server Error	Inernal Server Error	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__loader

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/loader HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/loader \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/loader', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/loader", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /loader

Return the loader status and list of loader runs

Return the loader status and list loader runs

Example responses

200 Response

{
  "loaderStatus": "busy",
  "loaderRunList": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ]
}

Responses

Status	Meaning	Description	Schema
200	OK	OK	LoaderStatus

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

get__loader_{loaderRunID}

Code samples

GET https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X GET https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID} \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.get('https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("GET", "https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

GET /loader/{loaderRunID}

Return the resutls of a loader run

Return the results of a loader run

Parameters

Name	In	Type	Required	Description
loaderRunID	path	string(uuid)	true	none

Example responses

200 Response

{
  "loaderRunOutput": [
    "string"
  ]
}

404 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	LoaderRunOutput
404	Not Found	Not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

delete__loader_{loaderRunID}

Code samples

DELETE https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID} HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/error

# You can also use wget
curl -X DELETE https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID} \
  -H 'Accept: application/error' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/error',
  'Authorization': 'Bearer {access-token}'
}

r = requests.delete('https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID}', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/error"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("DELETE", "https://api-gw-service-nmn.local/apis/fas/v1/loader/{loaderRunID}", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

DELETE /loader/{loaderRunID}

Delete a loader run

Delete a loader run

Parameters

Name	In	Type	Required	Description
loaderRunID	path	string(uuid)	true	none

Example responses

404 Response

Responses

Status	Meaning	Description	Schema
204	No Content	Successful delete	None
404	Not Found	Not found	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

post__loader_nexus

Code samples

POST https://api-gw-service-nmn.local/apis/fas/v1/loader/nexus HTTP/1.1
Host: api-gw-service-nmn.local
Accept: application/json

# You can also use wget
curl -X POST https://api-gw-service-nmn.local/apis/fas/v1/loader/nexus \
  -H 'Accept: application/json' \
  -H 'Authorization: Bearer {access-token}'

import requests
headers = {
  'Accept': 'application/json',
  'Authorization': 'Bearer {access-token}'
}

r = requests.post('https://api-gw-service-nmn.local/apis/fas/v1/loader/nexus', headers = headers)

print(r.json())

package main

import (
       "bytes"
       "net/http"
)

func main() {

    headers := map[string][]string{
        "Accept": []string{"application/json"},
        "Authorization": []string{"Bearer {access-token}"},
    }

    data := bytes.NewBuffer([]byte{jsonReq})
    req, err := http.NewRequest("POST", "https://api-gw-service-nmn.local/apis/fas/v1/loader/nexus", data)
    req.Header = headers

    client := &http.Client{}
    resp, err := client.Do(req)
    // ...
}

POST /loader/nexus

loader firmware images from the Nexus library

Have the loader read the firmware library from Nexus and add to S3 and create FAS compatible image records

Example responses

200 Response

{
  "loaderRunID": "3b7e76fb-4b2e-45d8-9266-664b8966d691"
}

429 Response

Responses

Status	Meaning	Description	Schema
200	OK	OK	LoaderRunID
429	Too Many Requests	Loader busy, try again later	Problem7807

To perform this operation, you must be authenticated by means of one of the following methods: bearerAuth

Schemas

LoaderStatus

{
  "loaderStatus": "busy",
  "loaderRunList": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
loaderStatus	string	false	none	none
loaderRunList	[string]	false	none	none

Enumerated Values

Property	Value
loaderStatus	busy
loaderStatus	ready

LoaderRunID

{
  "loaderRunID": "3b7e76fb-4b2e-45d8-9266-664b8966d691"
}

Properties

Name	Type	Required	Restrictions	Description
loaderRunID	string(uuid)	false	none	none

LoaderRunOutput

{
  "loaderRunOutput": [
    "string"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
loaderRunOutput	[string]	false	none	none

ActionSummary

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
  "overrideDryrun": true,
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "running",
  "operationCounts": {
    "total": 100,
    "initial": 0,
    "configured": 0,
    "blocked": 0,
    "needsVerified": 0,
    "verifying": 0,
    "inProgress": 32,
    "failed": 10,
    "success": 58,
    "noSolution": 4,
    "noOperation": 6,
    "aborted": 0,
    "unknown": 0
  },
  "description": "string",
  "blockedBy": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ],
  "errors": [
    "string"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
actionID	string(uuid)	false	none	none
snapshotID	string(uuid)	false	none	none
overrideDryrun	boolean	false	none	none
startTime	string(date-time)	false	none	none
endTime	string(date-time)	false	none	none
state	string	false	none	The state of the action - new - not yet started configured - configured, but not yet started blocked - configured, but cannot run because another action is executing running - started completed - the action has completed all operations abortSignaled - the action has been instructed to STOP all running operations aborted - the action has stopped all operations
operationCounts	OperationCounts	false	none	none
description	string	false	none	none
blockedBy	[string]	false	none	none
errors	[string]	false	none	none

Enumerated Values

Property	Value
state	new
state	configure
state	blocked
state	running
state	completed
state	abortSignaled
state	aborted

ActionSummarys

{
  "actions": [
    {
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
      "overrideDryrun": true,
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "running",
      "operationCounts": {
        "total": 100,
        "initial": 0,
        "configured": 0,
        "blocked": 0,
        "needsVerified": 0,
        "verifying": 0,
        "inProgress": 32,
        "failed": 10,
        "success": 58,
        "noSolution": 4,
        "noOperation": 6,
        "aborted": 0,
        "unknown": 0
      },
      "description": "string",
      "blockedBy": [
        "497f6eca-6276-4993-bfeb-53cbbbba6f08"
      ],
      "errors": [
        "string"
      ]
    }
  ]
}

Properties

Name	Type	Required	Restrictions	Description
actions	[ActionSummary]	false	none	none

Action

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "running",
  "description": "string",
  "operationSummary": {
    "initial": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "configured": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "blocked": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "needsVerified": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "verifying": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "inProgress": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "failed": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "success": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "noSolution": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "noOperation": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "aborted": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ],
    "unknown": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "xname": "string",
        "target": "string",
        "targetName": "string",
        "fromFirmwareVersion": "string",
        "stateHelper": "string"
      }
    ]
  },
  "overrideDryrun": true,
  "parameters": {
    "stateComponentFilter": {
      "xnames": [
        "x0c0s0b0",
        "x0c0s2b0"
      ],
      "partitions": [
        "p1"
      ],
      "groups": [
        "red",
        "blue"
      ],
      "deviceTypes": [
        "nodeBMC"
      ]
    },
    "inventoryHardwareFilter": {
      "manufacturer": "cray",
      "model": "c5000"
    },
    "imageFilter": {
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "overrideImage": true
    },
    "targetFilter": {
      "targets": [
        "BIOS",
        "BMC"
      ]
    },
    "command": {
      "version": "latest",
      "tag": "default",
      "overrideDryrun": true,
      "restoreNotPossibleOverride": true,
      "overwriteSameImage": true,
      "timeLimit": 10000,
      "description": "update cabinet xxxx"
    }
  },
  "blockedBy": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ],
  "errors": [
    "string"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
actionID	string(uuid)	false	none	none
snapshotID	string(uuid)	false	none	none
startTime	string(date-time)	false	none	none
endTime	string(date-time)	false	none	none
state	string	false	none	The state of the action - new - not yet started configured - configured, but not yet started blocked - configured, but cannot run because another action is executing running - started completed - the action has completed all operations abortSignaled - the action has been instructed to STOP all running operations aborted - the action has stopped all operations
description	string	false	none	none
operationSummary	OperationSummary	false	none	none
overrideDryrun	boolean	false	none	none
parameters	ActionParameters	false	none	none
blockedBy	[string]	false	none	none
errors	[string]	false	none	none

Enumerated Values

Property	Value
state	new
state	configure
state	blocked
state	running
state	completed
state	abortSignaled
state	aborted

ActionDetail

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "snapshotID": "0a404cc5-4bd4-40f5-b698-aa34ab33b3fb",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "running",
  "description": "string",
  "operationSummary": {
    "initial": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "configured": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "blocked": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "needsVerified": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "verifying": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "inProgress": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "failed": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "success": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "noSolution": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "noOperation": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "aborted": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ],
    "unknown": [
      {
        "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
        "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
        "startTime": "2019-08-24T14:15:22Z",
        "endTime": "2019-08-24T14:15:22Z",
        "state": "initial",
        "error": "string",
        "xname": "x0c0s2b0",
        "deviceType": "nodeBMC",
        "target": "bmc",
        "targetName": "bmc",
        "manufacturer": "cray",
        "model": "c5000",
        "softwareId": "string",
        "fromFirmwareVersion": "fw123.873US",
        "fromSemanticFirmwareVersion": "1.25.10",
        "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
        "fromTag": "default",
        "toFirmwareVersion": "fw456",
        "toSemanticFirmwareVersion": "1.35.0",
        "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
        "toTag": "recovery"
      }
    ]
  },
  "overrideDryrun": true,
  "parameters": {
    "stateComponentFilter": {
      "xnames": [
        "x0c0s0b0",
        "x0c0s2b0"
      ],
      "partitions": [
        "p1"
      ],
      "groups": [
        "red",
        "blue"
      ],
      "deviceTypes": [
        "nodeBMC"
      ]
    },
    "inventoryHardwareFilter": {
      "manufacturer": "cray",
      "model": "c5000"
    },
    "imageFilter": {
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "overrideImage": true
    },
    "targetFilter": {
      "targets": [
        "BIOS",
        "BMC"
      ]
    },
    "command": {
      "version": "latest",
      "tag": "default",
      "overrideDryrun": true,
      "restoreNotPossibleOverride": true,
      "overwriteSameImage": true,
      "timeLimit": 10000,
      "description": "update cabinet xxxx"
    }
  },
  "blockedBy": [
    "497f6eca-6276-4993-bfeb-53cbbbba6f08"
  ],
  "errors": [
    "string"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
actionID	string(uuid)	false	none	none
snapshotID	string(uuid)	false	none	none
startTime	string(date-time)	false	none	none
endTime	string(date-time)	false	none	none
state	string	false	none	The state of the action - new - not yet started configured - configured, but not yet started blocked - configured, but cannot run because another action is executing running - started completed - the action has completed all operations abortSignaled - the action has been instructed to STOP all running operations aborted - the action has stopped all operations
description	string	false	none	none
operationSummary	OperationDetail	false	none	none
overrideDryrun	boolean	false	none	none
parameters	ActionParameters	false	none	none
blockedBy	[string]	false	none	none
errors	[string]	false	none	none

Enumerated Values

Property	Value
state	new
state	configure
state	blocked
state	running
state	completed
state	abortSignaled
state	aborted

ActionID

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "overrideDryrun": true
}

Properties

Name	Type	Required	Restrictions	Description
actionID	string(uuid)	false	none	none
overrideDryrun	boolean	false	none	this field represents if the automatic dryrun was overridden by command.

ActionParameters

{
  "stateComponentFilter": {
    "xnames": [
      "x0c0s0b0",
      "x0c0s2b0"
    ],
    "partitions": [
      "p1"
    ],
    "groups": [
      "red",
      "blue"
    ],
    "deviceTypes": [
      "nodeBMC"
    ]
  },
  "inventoryHardwareFilter": {
    "manufacturer": "cray",
    "model": "c5000"
  },
  "imageFilter": {
    "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
    "overrideImage": true
  },
  "targetFilter": {
    "targets": [
      "BIOS",
      "BMC"
    ]
  },
  "command": {
    "version": "latest",
    "tag": "default",
    "overrideDryrun": true,
    "restoreNotPossibleOverride": true,
    "overwriteSameImage": true,
    "timeLimit": 10000,
    "description": "update cabinet xxxx"
  }
}

Properties

Name	Type	Required	Restrictions	Description
stateComponentFilter	ActionParameters_StateComponentFilter	false	none	none
inventoryHardwareFilter	ActionParameters_HardwareFilter	false	none	none
imageFilter	ActionParameters_ImageFilter	false	none	none
targetFilter	ActionParameters_TargetFilter	false	none	none
command	ActionParameters_Command	false	none	none

ActionParameters_StateComponentFilter

{
  "xnames": [
    "x0c0s0b0",
    "x0c0s2b0"
  ],
  "partitions": [
    "p1"
  ],
  "groups": [
    "red",
    "blue"
  ],
  "deviceTypes": [
    "nodeBMC"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
xnames	[string]	false	none	none
partitions	[string]	false	none	none
groups	[string]	false	none	none
deviceTypes	[string]	false	none	none

ActionParameters_HardwareFilter

{
  "manufacturer": "cray",
  "model": "c5000"
}

Properties

Name	Type	Required	Restrictions	Description
manufacturer	string	false	none	none
model	string	false	none	none

ActionParameters_TargetFilter

{
  "targets": [
    "BIOS",
    "BMC"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
targets	[string]	false	none	none

ActionParameters_ImageFilter

{
  "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
  "overrideImage": true
}

Properties

Name	Type	Required	Restrictions	Description
imageID	string(uuid)	false	none	none
overrideImage	boolean	false	none	Will not check device properties against image properties to ensure valid image. Default is false.

ActionParameters_Command

{
  "version": "latest",
  "tag": "default",
  "overrideDryrun": true,
  "restoreNotPossibleOverride": true,
  "overwriteSameImage": true,
  "timeLimit": 10000,
  "description": "update cabinet xxxx"
}

Properties

Name	Type	Required	Restrictions	Description
version	string	false	none	Go to the latest, earliest semantic version, or explicitly set a specific version as per the imageID.
tag	string	false	none	none
overrideDryrun	boolean	false	none	causes the action to be executed instead of simulated. False by default. Checks to see if there are images available to update device firmware as desired.
restoreNotPossibleOverride	boolean	false	none	Force the operation, even if the `fromFirmwareVersion` cannot be found. Default to false
overwriteSameImage	boolean	false	none	Force the operation, even if the ‘fromFirmwareVersion’ and the ’toFirmwareVersion’ are the same. Default to false.
timeLimit	integer	false	none	time limit for any operation in seconds
description	string	false	none	none

Enumerated Values

Property	Value
version	latest
version	earliest
version	explicit

DeviceFirmware

{
  "xname": "x0c0s2b0",
  "targets": [
    {
      "name": "BIOS",
      "firmwareVersion": "fw123.8s",
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "error": "string"
    }
  ],
  "error": "string"
}

Properties

Name	Type	Required	Restrictions	Description
xname	string	false	none	none
targets	[Target]	false	none	none
error	string	false	none	any error that was encoutered while populating device information

ImageCreate

{
  "deviceType": "nodeBMC",
  "manufacturer": "cray",
  "models": [
    [
      "c5000",
      "c5001"
    ]
  ],
  "target": "BIOS",
  "softwareIds": [
    "string"
  ],
  "tags": [
    [
      "recovery",
      "default"
    ]
  ],
  "firmwareVersion": "f1.123.24xz",
  "semanticFirmwareVersion": "1.2.252",
  "updateURI": "string",
  "needManualReboot": true,
  "waitTimeBeforeManualRebootSeconds": 0,
  "waitTimeAfterRebootSeconds": 0,
  "pollingSpeedSeconds": 0,
  "forceResetType": "string",
  "s3URL": "s3://firmware/f1.1123.24.xz.iso",
  "allowableDeviceStates": [
    "ON"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
deviceType	string	false	none	node type
manufacturer	string	false	none	none
models	[string]	false	none	none
target	string	false	none	node target
softwareIds	[string]	false	none	none
tags	[string]	true	none	none
firmwareVersion	string	true	none	none
semanticFirmwareVersion	string	true	none	none
updateURI	string	false	none	where to point the update at
needManualReboot	boolean	false	none	whether or not FAS needs to initiate a manual reboot after the update command has been issued
waitTimeBeforeManualRebootSeconds	integer	false	none	amount of time to wait after an update to perform a manual reboot
waitTimeAfterRebootSeconds	integer	false	none	amount of time to wait after a manual reboot before proceeding to verification step
pollingSpeedSeconds	integer	false	none	amount of time to wait between requests to the device to avoid overloading it
forceResetType	string	false	none	the command to issue to the redfish device to force a reboot
s3URL	string	true	none	none
allowableDeviceStates	[string]	false	none	none

ImageGet

{
  "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
  "createTime": "2019-08-24T14:15:22Z",
  "deviceType": "nodeBMC",
  "manufacturer": "cray",
  "models": [
    "c5000"
  ],
  "target": "BIOS",
  "softwareIds": [
    "string"
  ],
  "tags": [
    [
      "recovery",
      "default"
    ]
  ],
  "firmwareVersion": "f1.123.24xz",
  "semanticFirmwareVersion": "1.2.252",
  "updateURI": "string",
  "needManualReboot": true,
  "waitTimeBeforeManualRebootSeconds": 0,
  "waitTimeAfterRebootSeconds": 0,
  "pollingSpeedSeconds": 0,
  "forceResetType": "string",
  "s3URL": "s3://firmware/f1.1123.24.xz.iso",
  "allowableDeviceStates": [
    "ON"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
imageID	string(uuid)	false	none	none
createTime	string(date-time)	false	none	none
deviceType	string	false	none	node type
manufacturer	string	false	none	none
models	[string]	false	none	none
target	string	true	none	node target
softwareIds	[string]	false	none	none
tags	[string]	false	none	none
firmwareVersion	string	false	none	none
semanticFirmwareVersion	string	false	none	none
updateURI	string	false	none	where to point the update at
needManualReboot	boolean	false	none	whether or not FAS needs to initiate a manual reboot after the update command has been issued
waitTimeBeforeManualRebootSeconds	integer	false	none	amount of time to wait after an update to perform a manual reboot
waitTimeAfterRebootSeconds	integer	false	none	amount of time to wait after a manual reboot before proceeding to verification step
pollingSpeedSeconds	integer	false	none	amount of time to wait between requests to the device to avoid overloading it
forceResetType	string	false	none	the command to issue to the redfish device to force a reboot
s3URL	string	false	none	none
allowableDeviceStates	[string]	false	none	none

ImageID

{
  "imageID": "00000000-0000-0000-0000-000000000000"
}

Properties

Name	Type	Required	Restrictions	Description
imageID	string(uuid)	false	none	none

ImageList

{
  "images": [
    {
      "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
      "createTime": "2019-08-24T14:15:22Z",
      "deviceType": "nodeBMC",
      "manufacturer": "cray",
      "models": [
        "c5000"
      ],
      "target": "BIOS",
      "softwareIds": [
        "string"
      ],
      "tags": [
        [
          "recovery",
          "default"
        ]
      ],
      "firmwareVersion": "f1.123.24xz",
      "semanticFirmwareVersion": "1.2.252",
      "updateURI": "string",
      "needManualReboot": true,
      "waitTimeBeforeManualRebootSeconds": 0,
      "waitTimeAfterRebootSeconds": 0,
      "pollingSpeedSeconds": 0,
      "forceResetType": "string",
      "s3URL": "s3://firmware/f1.1123.24.xz.iso",
      "allowableDeviceStates": [
        "ON"
      ]
    }
  ]
}

Properties

Name	Type	Required	Restrictions	Description
images	array	false	none	none

Operation

{
  "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "initial",
  "error": "string",
  "xname": "x0c0s2b0",
  "deviceType": "nodeBMC",
  "target": "bmc",
  "targetName": "bmc",
  "manufacturer": "cray",
  "model": "c5000",
  "softwareId": "string",
  "fromFirmwareVersion": "fw123.873US",
  "fromSemanticFirmwareVersion": "1.25.10",
  "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
  "fromTag": "default",
  "toFirmwareVersion": "fw456",
  "toSemanticFirmwareVersion": "1.35.0",
  "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
  "toTag": "recovery"
}

Properties

Name	Type	Required	Restrictions	Description
operationID	string(uuid)	false	none	none
actionID	string(uuid)	false	none	none
startTime	string(date-time)	false	none	none
endTime	string(date-time)	false	none	none
state	string	false	none	The state of the operation - initial - not yet started configured - configured, but not yet started blocked - cannot run because another operation is blocking this inProgress - operation started - sent update command needsVerifed - operation was sent update command, waiting for finish to verify verifing - opertion verifing operation aborted - operation was aborted noOperation - operation has nothing to do - already at firmware level noSolution - operation could not find a firmware to flash succeeded - opeartion completed successfully failed - operation failed
error	string	false	none	none
xname	string	false	none	none
deviceType	string	false	none	none
target	string	false	none	none
targetName	string	false	none	none
manufacturer	string	false	none	none
model	string	false	none	none
softwareId	string	false	none	none
fromFirmwareVersion	string	false	none	none
fromSemanticFirmwareVersion	string	false	none	none
fromImageURL	string	false	none	none
fromTag	string	false	none	none
toFirmwareVersion	string	false	none	none
toSemanticFirmwareVersion	string	false	none	none
toImageURL	string	false	none	none
toTag	string	false	none	none

Enumerated Values

Property	Value
state	initial
state	configured
state	blocked
state	inProgress
state	needsVerifed
state	verifying
state	abort
state	noOperation
state	noSolution
state	succeeded
state	failed

OperationCounts

{
  "total": 100,
  "initial": 0,
  "configured": 0,
  "blocked": 0,
  "needsVerified": 0,
  "verifying": 0,
  "inProgress": 32,
  "failed": 10,
  "success": 58,
  "noSolution": 4,
  "noOperation": 6,
  "aborted": 0,
  "unknown": 0
}

Properties

Name	Type	Required	Restrictions	Description
total	integer	false	none	total count of all operations
initial	integer	false	none	count of operations that have not yet been configured
configured	integer	false	none	count of operations that have been configured but not started
blocked	integer	false	none	count of operations that have been configured, but cannot yet launch because another operation is pending on the same xname
needsVerified	integer	false	none	count of operations that have been started, but need final verification to determine if the operation was successful
verifying	integer	false	none	count of operations that have started verification, but are not finished verification.
inProgress	integer	false	none	count of operations that have been started, but have not reach the verification stage.
failed	integer	false	none	count of operations that have failed to compelete firmware task
success	integer	false	none	count of operations that have succeeded in completing firmware task
noSolution	integer	false	none	count of operations that have no viable solution to satisfy the request. This is usally because no suitable imabe exists.
noOperation	integer	false	none	count of operations that do not need to be executed, because the desired end state is already achieved.
aborted	integer	false	none	count of operations that have been aborted. It is in-determinate if their firmware task was executed.
unknown	integer	false	none	count of unknown states -> should not be present.

OperationSummary

{
  "initial": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "configured": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "blocked": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "needsVerified": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "verifying": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "inProgress": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "failed": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "success": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "noSolution": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "noOperation": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "aborted": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ],
  "unknown": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "xname": "string",
      "target": "string",
      "targetName": "string",
      "fromFirmwareVersion": "string",
      "stateHelper": "string"
    }
  ]
}

Properties

Name	Type	Required	Restrictions	Description
initial	[OperationKey]	false	none	count of operations that have not yet been configured
configured	[OperationKey]	false	none	count of operations that have been configured but not started
blocked	[OperationKey]	false	none	count of operations that have been configured, but cannot yet launch because another operation is pending on the same xname
needsVerified	[OperationKey]	false	none	count of operations that have been started, but need final verification to determine if the operation was successful
verifying	[OperationKey]	false	none	count of operations that have started verification, but are not finished verification.
inProgress	[OperationKey]	false	none	count of operations that have been started, but have not reach the verification stage.
failed	[OperationKey]	false	none	count of operations that have failed to compelete firmware task
success	[OperationKey]	false	none	count of operations that have succeeded in completing firmware task
noSolution	[OperationKey]	false	none	count of operations that have no viable solution to satisfy the request. This is usally because no suitable imabe exists.
noOperation	[OperationKey]	false	none	count of operations that do not need to be executed, because the desired end state is already achieved.
aborted	[OperationKey]	false	none	count of operations that have been aborted. It is in-determinate if their firmware task was executed.
unknown	[OperationKey]	false	none	count of unknown states -> should not be present.

OperationDetail

{
  "initial": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "configured": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "blocked": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "needsVerified": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "verifying": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "inProgress": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "failed": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "success": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "noSolution": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "noOperation": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "aborted": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ],
  "unknown": [
    {
      "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "initial",
      "error": "string",
      "xname": "x0c0s2b0",
      "deviceType": "nodeBMC",
      "target": "bmc",
      "targetName": "bmc",
      "manufacturer": "cray",
      "model": "c5000",
      "softwareId": "string",
      "fromFirmwareVersion": "fw123.873US",
      "fromSemanticFirmwareVersion": "1.25.10",
      "fromImageURL": "s3://fw-update/01ca4727-27d7-43a6-9c5b-f9dfcf805ded/filename.bin",
      "fromTag": "default",
      "toFirmwareVersion": "fw456",
      "toSemanticFirmwareVersion": "1.35.0",
      "toImageURL": "s3://fw-update/3586af8d-0fba-4bfa-8fc5-782764d335e8/filename-1.0.bin",
      "toTag": "recovery"
    }
  ]
}

Properties

Name	Type	Required	Restrictions	Description
initial	[Operation]	false	none	count of operations that have not yet been configured
configured	[Operation]	false	none	count of operations that have been configured but not started
blocked	[Operation]	false	none	count of operations that have been configured, but cannot yet launch because another operation is pending on the same xname
needsVerified	[Operation]	false	none	count of operations that have been started, but need final verification to determine if the operation was successful
verifying	[Operation]	false	none	count of operations that have started verification, but are not finished verification.
inProgress	[Operation]	false	none	count of operations that have been started, but have not reach the verification stage.
failed	[Operation]	false	none	count of operations that have failed to compelete firmware task
success	[Operation]	false	none	count of operations that have succeeded in completing firmware task
noSolution	[Operation]	false	none	count of operations that have no viable solution to satisfy the request. This is usally because no suitable imabe exists.
noOperation	[Operation]	false	none	count of operations that do not need to be executed, because the desired end state is already achieved.
aborted	[Operation]	false	none	count of operations that have been aborted. It is in-determinate if their firmware task was executed.
unknown	[Operation]	false	none	count of unknown states -> should not be present.

OperationKey

{
  "operationID": "304f12c1-106a-4031-8993-97a9e8ea25f4",
  "xname": "string",
  "target": "string",
  "targetName": "string",
  "fromFirmwareVersion": "string",
  "stateHelper": "string"
}

Properties

Name	Type	Required	Restrictions	Description
operationID	string(uuid)	false	none	none
xname	string	false	none	none
target	string	false	none	none
targetName	string	false	none	none
fromFirmwareVersion	string	false	none	the currently identified firmware version on the xname/target before attempting an update. May be empty.
stateHelper	string	false	none	a helper string that might further explain the current state.

Problem7807

{
  "type": "about:blank",
  "detail": "Detail about this specific problem occurrence. See RFC7807",
  "instance": "",
  "status": 400,
  "title": "Description of HTTP Status code, e.g. 400"
}

RFC 7807 compliant error payload. All fields are optional except the ’type’ field.

Properties

Name	Type	Required	Restrictions	Description
type	string	true	none	none
detail	string	false	none	none
instance	string	false	none	none
status	number(int32)	false	none	none
title	string	false	none	none

RelatedSnapshotActions

{
  "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
  "startTime": "2019-08-24T14:15:22Z",
  "endTime": "2019-08-24T14:15:22Z",
  "state": "completed"
}

Properties

Name	Type	Required	Restrictions	Description
actionID	string(uuid)	false	none	none
startTime	string(date-time)	false	none	none
endTime	string(date-time)	false	none	none
state	string	false	none	The state of the action - new - not yet started configured - configured, but not yet started blocked - configured, but cannot run because another action is executing running - started completed - the action has completed all operations abortSignaled - the action has been instructed to STOP all running operations aborted - the action has stopped all operations

Enumerated Values

Property	Value
state	new
state	configure
state	blocked
state	running
state	completed
state	abortSignaled
state	aborted

ServiceStatus

{
  "serviceStatus": "running"
}

Properties

Name	Type	Required	Restrictions	Description
serviceStatus	string	false	none	none

ServiceStatusDetails

{
  "serviceVersion": "1.2.0",
  "serviceStatus": "running",
  "hmsStatus": "connected",
  "storageStatus": "connected"
}

Properties

Name	Type	Required	Restrictions	Description
serviceVersion	string	false	none	none
serviceStatus	string	false	none	none
hmsStatus	string	false	none	none
storageStatus	string	false	none	none

ServiceVersion

{
  "serviceVersion": "1.2.0"
}

Properties

Name	Type	Required	Restrictions	Description
serviceVersion	string	false	none	none

Snapshot

{
  "name": "string",
  "captureTime": "2019-08-24T14:15:22Z",
  "expirationTime": "2019-08-24T14:15:22Z",
  "ready": false,
  "relatedActions": [
    {
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "completed"
    }
  ],
  "devices": [
    {
      "xname": "x0c0s2b0",
      "targets": [
        {
          "name": "BIOS",
          "firmwareVersion": "fw123.8s",
          "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
          "error": "string"
        }
      ],
      "error": "string"
    }
  ],
  "parameters": {
    "name": "20200402_all_xnames",
    "expirationTime": "2019-08-24T14:15:22Z",
    "stateComponentFilter": {
      "xnames": [
        "x0c0s0b0",
        "x0c0s2b0"
      ],
      "partitions": [
        "p1"
      ],
      "groups": [
        "red",
        "blue"
      ],
      "deviceTypes": [
        "nodeBMC"
      ]
    },
    "inventoryHardwareFilter": {
      "manufacturer": "cray",
      "model": "c5000"
    },
    "targetFilter": {
      "targets": [
        "BIOS",
        "BMC"
      ]
    }
  },
  "errors": [
    "string"
  ]
}

Properties

Name	Type	Required	Restrictions	Description
name	string	false	none	none
captureTime	string(date-time)	false	none	none
expirationTime	string(date-time)	false	none	none
ready	boolean	false	none	whether or not the snapshot has completed
relatedActions	[RelatedSnapshotActions]	false	none	none
devices	[DeviceFirmware]	false	none	none
parameters	SnapshotParameters	false	none	none
errors	[string]	false	none	none

SnapshotAll

{
  "snapshots": [
    {
      "name": "pre_system_upgrade",
      "captureTime": "2019-08-24T14:15:22Z",
      "expirationTime": "2019-08-24T14:15:22Z",
      "ready": false,
      "relatedActions": [
        {
          "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
          "startTime": "2019-08-24T14:15:22Z",
          "endTime": "2019-08-24T14:15:22Z",
          "state": "completed"
        }
      ],
      "uniqueDeviceCount": 0
    }
  ]
}

Properties

Name	Type	Required	Restrictions	Description
snapshots	[SnapshotSummary]	false	none	none

SnapshotID

{
  "name": "20200402_all_xnames"
}

Properties

Name	Type	Required	Restrictions	Description
name	string	false	none	none

SnapshotParameters

{
  "name": "20200402_all_xnames",
  "expirationTime": "2019-08-24T14:15:22Z",
  "stateComponentFilter": {
    "xnames": [
      "x0c0s0b0",
      "x0c0s2b0"
    ],
    "partitions": [
      "p1"
    ],
    "groups": [
      "red",
      "blue"
    ],
    "deviceTypes": [
      "nodeBMC"
    ]
  },
  "inventoryHardwareFilter": {
    "manufacturer": "cray",
    "model": "c5000"
  },
  "targetFilter": {
    "targets": [
      "BIOS",
      "BMC"
    ]
  }
}

Properties

Name	Type	Required	Restrictions	Description
name	string	false	none	none
expirationTime	string(date-time)	false	none	time at which the snapshot expires and is automatically Deleted
stateComponentFilter	ActionParameters_StateComponentFilter	false	none	none
inventoryHardwareFilter	ActionParameters_HardwareFilter	false	none	none
targetFilter	ActionParameters_TargetFilter	false	none	none

SnapshotSummary

{
  "name": "pre_system_upgrade",
  "captureTime": "2019-08-24T14:15:22Z",
  "expirationTime": "2019-08-24T14:15:22Z",
  "ready": false,
  "relatedActions": [
    {
      "actionID": "4a156b6a-0d73-4d7b-92f3-7bc07d13205f",
      "startTime": "2019-08-24T14:15:22Z",
      "endTime": "2019-08-24T14:15:22Z",
      "state": "completed"
    }
  ],
  "uniqueDeviceCount": 0
}

Properties

Name	Type	Required	Restrictions	Description
name	string	false	none	none
captureTime	string(date-time)	false	none	none
expirationTime	string(date-time)	false	none	none
ready	boolean	false	none	whether or not the snapshot has completed
relatedActions	[RelatedSnapshotActions]	false	none	none
uniqueDeviceCount	integer	false	none	count of unique xnames associated with the snapshot

Target

{
  "name": "BIOS",
  "firmwareVersion": "fw123.8s",
  "imageID": "bbdcb050-2e05-43cb-812a-e1296cd0c01a",
  "error": "string"
}

Properties

Name	Type	Required	Restrictions	Description
name	string	false	none	none
firmwareVersion	string	false	none	none
imageID	string(uuid)	false	none	none
error	string	false	none	any error that was encoutered while populating target information