Validate CSM Health During a CSM Upgrade

  • Before performing the health validation, be sure that at least 15 minutes have elapsed since the CSM services were upgraded. This allows the various Kubernetes resources to initialize and start.
  • If the site does not use UAIs, then skip UAS and UAI validation. If UAIs are used, then before validating UAS and UAI, first validate any products that configure UAS (such as Cray Analytics and Cray Programming Environment); the procedures for this are beyond the scope of this document. Failures in UAI creation that result from incorrect or incomplete installation of these products will generally take the form of UAIs stuck in waiting state, trying to set up volume mounts.
  • Although it is not recommended, the Booting CSM barebones image test may be skipped if all compute nodes are active running application workloads.

  1. (ncn-m002#) If a typescript session is already running in the shell, then first stop it with the exit command.

  2. (ncn-m002#) Start a typescript.

    script -af /root/csm_upgrade.$(date +%Y%m%d_%H%M%S).post_upgrade_health_validation.txt
export PS1='\u@\H \D{%Y-%m-%d} \t \w # '

    If additional shells are opened during this procedure, then record those with typescripts as well. When resuming a procedure after a break, always be sure that a typescript is running before proceeding.

  3. Validate CSM health.

    See Validate CSM Health.

  4. (ncn-m002#) Stop typescripts.

    For any typescripts that were started during the health validation procedure, stop them with the exit command.

  5. (ncn-m002#) Backup upgrade logs and typescript files to a safe location.

    1. If any typescript files are on different NCNs, then copy them to /root on ncn-m002.

    2. Create a tar file containing the logs and typescript files.

      If any typescript file names are not of the form csm_upgrade.*.txt, then append their names to the following tar command in order to include them.

      TARFILE="csm_upgrade.$(date +%Y%m%d_%H%M%S).logs.tgz"
tar -czvf "/root/${TARFILE}" /root/csm_upgrade.*.txt /root/output.log

    3. Upload the tar file into S3.

      This step requires that the Cray Command Line Interface is configured on the node. This should have already been done on ncn-m002 during the upgrade process. If needed, see Configure the Cray CLI.

      cray artifacts create config-data "${TARFILE}" "/root/${TARFILE}"