This documentation helps network administrators and support personnel install install and manage Aruba, Dell, and Mellanox network devices in a CSM install.
The HPE Cray recommended way of configuring the network is by using the CANU tool. Therefore this guide will not go into detail on how to configure each switch manually using the CLI. Instead, it will give helpful examples of how to configure/use features generated by CANU, in order to provide administrators easy ways to customize their installation.
Also included in this guide are the current documented and supported network scenarios.
NOTE Not every configuration option is covered here; for any configuration outside of the scope of this document,
refer to the official Aruba, Dell, or Mellanox user manuals.
This document is intended for network administrators and support personnel.
NOTE The display and command lines illustrated in this document are examples and might not exactly match any
particular environment. The switch and accessory drawings in this document are for illustration only, and may not
exactly match installed products.
If CSM has been installed and Vault is running, add the switch credentials into Vault. Certain tests,
including goss-switch-bgp-neighbor-aruba-or-mellanox use these credentials to test the state of the switch. This step
is not required to configure the management network. If Vault is unavailable, this step can be temporarily skipped. Any
automated tests that depend on the switch credentials being in Vault will fail until they are added.
(ncn-mw#) The following script will prompt for the password, write it to Vault, and then read it back
to verify that it was written correctly.
/usr/share/doc/csm/scripts/operations/configuration/write_sw_admin_pw_to_vault.py
On success, the script will exit with return code 0 and have the following final lines of output:
Writing switch admin password to Vault
Password read from Vault matches what was written
SUCCESS
| Situation | Link |
|---|---|
| Upgrade CANU to the latest version | Install/Upgrade CANU |
| Switches have no configuration on them | Fresh Install |
| Reinstalling the same CSM version | Re-install |
| New hardware was added to the system | Added Hardware |
| Switch failed and needs to be replaced | Replace Switch |
The user guides contain information such as generic configuration examples, explanation of currently used technologies, topology maps, and a summary of the network design used in the CSM management network.
See CSM Automatic Network Utility (CANU).
| Page | Description |
|---|---|
| Collect data | Input data needed to generate switch configurations |
| Cable Management Network Servers | Shows how servers in CSM should be cabled |
| SHCD HMN Tab/HMN Connections Rules | Shows how the HMN tab on the SHCD should be formatted |
| SHCD Connection Rules | Shows how the all tabs on the SHCD should be formatted EXCEPT the HMN tab |
| Backup Custom Configuration | Shows users how to backup configuration that is custom to their system; this includes site connections and credentials |
| Configuration Management | Shows users how to save a running configuration to the switch for backup purposes or to switch between different switch configurations |
| Validate Switch Configuration | Compares the configuration on a running system to what is generated |
| Wipe Management Switches | Erase the switch configuration; this is useful for fresh installs |
| Generate Switch Configurations | Generate configurations for all management switches |
| Manual Switch Configurations | Some configuration needs to be done manually (authentication/SNMP) |
| Validate SHCD | Validate the SHCD against the CSM network architecture |
This release applies to the following product models:
8320 switch series8325 switch series8360 switch series6300 switch seriesSN2100 switch seriesSN2700 switch seriesS3048-ON switch seriesS4148T-ON switch seriesS4148F-ON switch seriesFor architecture and naming convention information, see Cray Network Architecture model.
These sections list enhancements, fixes, and known issues for this version of the CSM management network.
These will be found on the CANU releases page.
Known and fixed issue are listed in the CANU release notes. See CANU releases.
The following are known open issues with this branch of the software.
The Symptom statement describes what a user might experience if this is seen on the network. The Scenario statement provides additional environment details and trigger summaries. When available, the Workaround statement provides a workaround to the issue.
Known and fixed issue are listed in the CANU release notes. See CANU releases.
To initiate a subscription to receive future HPE Security Bulletin alerts via email, see
the HPE Support Center.
A Security Bulletin is the published notification of security vulnerabilities and is the only communication vehicle for security vulnerabilities.