VLAN Interface
The switch supports classic L3 VLAN interfaces.
Relevant configuration
(switch (config)#) Configure the VLAN:
(switch(config vlan 6)#) Create and enable the VLAN interface, and assign it an IP address:
Show commands to validate functionality
Expected results
- Administrators can configure the VLAN
- Administrators can enable the interface and associate it with the VLAN
- Administrators can create an IP-enabled VLAN interface, and it is up
- Administrators validate the configuration is correct
- Administrators can ping from the switch to the client and from the client to the switch
Back to Index