Troubleshoot Interfaces with IP Address Issues

Correct NCNs that are failing to assigning a static IP address or detect a duplicate IP address.

The Wicked network manager tool will fail to bring an interface up if its assigned IP address already exists in the respective LAN. This can be detected by checking for signs of duplicate IP address messages in the log.

Prerequisites

An NCN has an interface that is failing to assign a static IP address or that has a duplicate IP address.

Procedure

(ncn#) Use one of the following options to correct NCNs that are failing to assigning a static IP address or to detect a duplicate IP address:

  • Check the logs in /var/log/ for reports of duplicate IP addresses.

    This also will show which MAC address is being used for the IP address.

    grep duplicate /var/log/*

    Example output:

    warn:2020-08-04T19:22:02.434775+00:00 ncn-w001 wickedd[2188]: bond0: IPv4 duplicate address 10.1.1.1 detected (in use by 00:30:48:bb:e8:d2)!

  • Add an IP address that is not found or commonly assigned on the respective network.

    1. Edit the /etc/sysconfig/network/ifcfg-FILENAME file.

    2. Reload the interface.

      Use the following command to safely reload the interface:

      wicked ifreload INTERFACE_NAME

      If that does not work, attempt to forcefully add it:

      systemctl restart wickedd-nanny

  • Add the duplicate IP address with the ip command.

    1. Add the duplicate IP address.

      The command below will bypass Wicked and will ignore the system preference:

      ip a a IP_ADDRESS/MASK dev INTERFACE_NAME

      For example:

      ip a a 10.1.1.1/16 dev bond0

    2. View the bond.

      ip a s bond0

      Example output:

      8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9238 qdisc noqueue state UP group default qlen 1000
    link/ether b8:59:9f:c7:11:12 brd ff:ff:ff:ff:ff:ff
    inet 10.1.1.1/16 brd 10.1.255.255 scope global bond0
       valid_lft forever preferred_lft forever
    inet6 fe80::ba59:9fff:fec7:1112/64 scope link
       valid_lft forever preferred_lft forever

    3. Delete the IP address after the duplicate IP address is removed.

      ip a d IP_ADDRESS/MASK dev bond0

      For example:

      ip a d 10.1.1.1/16 dev bond0

  • (Not recommended) Allow the duplicate IP address to exist.

    This is not recommended because it is unstable and can make the work harder to correct down the line. The easiest way to deal with the duplicate is by adding another IP address, and then logging into the duplicate and nullifying it. This block will disable the safeguard for duplicate IP addresses.

    sed -i '^CHECK_DUPLICATE_IP=.*/CHECK_DUPLICATE_IP="no"/' /etc/sysconfig/network/config
wicked ifup INTERFACE_NAME

Notes

(ncn-mw#) In this case, restarts of those services (in the Kubernetes user namespace) can be performed by executing the following command:

kubectl delete po -n user $(kubectl get po -n user | grep -v NAME | awk '\{ print $1 }')