VLAN Interface

The switch supports classic L3 VLAN interfaces.

Configuration commands

(switch#) Configure the VLAN:

vlan VLAN

(switch#) The default mode of any VLAN is L2 only. To enable L3 functionality, run no shutdown on the VLAN:

interface vlan 2
no shutdown

Show commands to validate functionality

(switch#)

show interface vlan

Expected results

  • Administrators can configure the VLAN.
  • Administrators can enable the interface and associate it with the VLAN.
  • Administrators can create an IP-enabled VLAN interface, and it is up.
  • Administrators validate the configuration is correct.
  • Administrators can ping from the switch to the client and from the client to the switch.

Back to Index