Post-Rollout Verification

  1. Post-Rollout Verification Steps
  2. Stop the typescript
  3. References
  4. Next Steps

1. Post-Rollout Verification Steps

After all nodes are rolled out, validate the system:

  1. Confirm all management nodes are running the expected kernel:

    pdsh -w $(echo $(ceph orch host ls | grep ncn | cut -f1 -d" " | xargs) $(kubectl get nodes | grep ncn | cut -f1 -d" " | xargs) | sed 's/ /,/g') 'uname -r' |dshbak -c

    Example output:

    ----------------
ncn-m[001-003],ncn-s[001-003],ncn-w[001-004]
----------------
<NEW_KERNEL_VERSION>

    Important: Note that the kernel version NEW_KERNEL_VERSION is the version based on the current CSM version and RRU version, as specified in Valid update paths.

  2. Verify the csm-security product is registered in the product catalog:

    sat showrev --products | grep csm-security

    Expected output:

    | csm-security                        | <NEW_RRU_VERSION> | -                                           | -                                                   |

    Important: Note that NEW_RRU_VERSION is replaced with RRU version based on the current CSM version, as specified in Valid update paths

2. Stop the typescript

For any typescripts that were started during this preparation stage, stop them with the exit command.

3. References

4. Next steps